Abstract
This paper proposes a novel path planning method for improving the feasibility of a forced landing. When an aircraft completely loses its thrust, the only measure it can take is to make a forced landing at an adjacent airport as soon as possible. In such a situation, the flight path to the landing point must be safe and viable. This paper details a method which enables safer and easier landing by transferring the benefits of excess altitude to the final approach length. Moreover, by planning the descent angle of final approach to be in the middle of a non-spoiler and a full-spoiler glide angle, this method enables a change in descent angle to correct any tracking errors, without using thrust. To verify the effectiveness of the proposed method, six degrees-of-freedom nonlinear simulations were performed and the results are compared with comparable methods. From the simulation results, it was confirmed that the proposed method could plan a safe path in a sufficiently short time and the aircraft could reach the landing point safely.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Collection of data about commercial airplane in 2014, chapter 1, Japan Aircraft Development Corporation, http://www.jadc.jp/files/topics/38_ext_01_0.pdf (2014). Accessed 25 December, 2014
Survey and Research about an analysis of the effect of Low-Cost-Carrier entry, Ministry of Land Infrastructure Transport and Tourism, http://www.mlit.go.jp/pri/kouenkai/syousai/pdf/research-p140528/05.pdf (2014). Accessed 25 December, 2014
Information about safety of air transportation in 2013, Japanese Civil Aviation Bureau, http://www.mlit.go.jp/common/001047479.pdf (2014). Accessed 25 December, 2014
Volcanic Hazards Impacts on Aviation, Committee on Commerce Science and Transportation, http://www.cusvo.org/docs/volcanichazards031606.pdf (2006). Accessed 25 December 2014
US Airways Flight 1549 Accident Report, NTSB (2010). Accessed 25 December 2014
Bird strike data in 2012, Ministry of Land, Infrastructure, Transport, and Tourism, http://www.mlit.go.jp/common/000994317.pdf (2013). Accessed 25 December, 2014
FAA, Order 8260.38A
Pillar, E., Luis, M., Xi, L., Rodney, W.: Automating Human Thought Processes for a UAV Forced Landing. J. Intell. Robot. Syst. 57(1-4), 329–349 (2010)
Luis, M., Pillar, E.: Controlled Emergency Landing of an Unpowered Unmanned Aerial System. J. Intell. Robot. Syst. 70(1-4), 421–435 (2010)
Adler, A., Bar-Gill, A., Simkin, N.: Optimal flight path for engine-out emergency landing, 24th Chinese Control and Decision Conference, pp. 2908–2915 (2012)
Matthew, C., Wen-Hua, C., Peter, R.: Reachability Analysis of Landing Sites for Forced Landing of a UAS. J. Intell. Robot. Syst. 73(1-4), 635–653 (2014)
Aiying, L., Wenrui, D., Jiaxing, W., Hongguang, L.: Autonomous Vision-Based Safe Area Selection Algorithm for UAV Emergency Forced Landing. Communications in Computer and Information Science 308, 254–261 (2012)
Johannes, S., Walter, F.: Fast Generation of Landing Path for Fixed-Wing Aircraft with Thrust Failure, AIAA Guidaince, Navigation, and Control Conference, San Diego, California, USA, 4–8 (2016)
Dubins, L. E.: On Curves of minimal length with a constraint on average curvature, and with prescribes initial and terminal positions and tangents. Am. J. Math. 79(3), 497–516 (1957)
Jan, R.: Airplane Flight Dynamics and Automatic Flight Controls DAR corporation (2001)
Marcos, A.: A Linear Parameter Varying Model of the Boeing 747-100/200 Longitudinal Motion University of Minnesota (2001)
AIP Japan, Japan Civil Aviation Bureau, https://aisjapan.mlit.go.jp/html/AIP/html/20141211/frame/index-en-JP.html/#efct=20141211 (2014). Accessed 25 December, 2014
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Izuta, S., Takahashi, M. Path Planning to Improve Reachability in a Forced Landing. J Intell Robot Syst 86, 291–307 (2017). https://doi.org/10.1007/s10846-016-0431-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10846-016-0431-3