Use Apple TV to play audio throughout your home

You can send audio from Apple TV to one or more AirPlay 2–enabled devices (such as HomePod and other smart speakers and TVs) connected to the same network in your home. You can also send audio from AirPlay 2 speakers like HomePod to Apple TV.

Before you start, make sure you’ve set up your devices in the Home app on an iOS, iPadOS, or macOS (Catalina or later) device. For more information, see the iPhone User Guide.

1. Do either of the following:

   • Press and hold the TV button on the Siri Remote to open Control Center, then select the Audio Controls button .

   • If you see the Audio Controls button in an app, select it.

   A list of available audio devices appears, organized by room (as assigned in the Home app on your iOS, iPadOS, or macOS device).

   

2. Do any of the following:

   • Send audio from Apple TV to a speaker in another room: Navigate down, then select a device or devices. The currently playing song appears at the top of the screen under a description of the rooms you selected (for example, Living Room + Dining Room).

     Tip: If your Apple TV is connected to a home theater receiver or TV via HDMI cable (shown onscreen as Receiver Speakers), you may need to calibrate the audio signal so that the audio is in sync with wireless speakers elsewhere in your home. See “Calibrate audio between your wired and wireless speakers” below.

     Some home theater receivers and smart TVs that also support AirPlay may appear twice in the list—as Receiver Speakers (connected via HDMI) and as AirPlay speakers. For the best audio quality, choose Receiver Speakers.

   • Send audio from a speaker in another room to Apple TV: Navigate up to highlight the currently playing song, navigate right to highlight another room, then navigate down and select the Apple TV. The song that was playing in the other room appears grouped with Apple TV.

   • Adjust the volume of devices in another room: Navigate right in the top row to select another room, then press the or button on the Siri Remote.

You can connect one or two HomePod speakers to Apple TV 4K to enjoy room-filling stereo sound. When you set up a second HomePod as a stereo pair, you get true stereo sound and a more immersive sound stage for your home theater.

If you have an Apple TV 4K (2nd generation), you can play audio on your HomePod speakers from devices such as DVD players or game consoles that are connected to a supported TV with an HDMI cable. For more information, see Set up Apple TV.

Before you start, make sure you’ve assigned a room to your Apple TV. Your HomePod (or HomePod stereo pair) must be connected to the same network and set up in the same room as your Apple TV 4K using the Home app on an iOS, iPadOS, or macOS (Catalina or later) device.

For more information on setting up HomePod, see the HomePod User Guide.

1. Open Settings on Apple TV 4K.

2. Go to Video and Audio > Audio Output, then select the HomePod (or HomePod stereo pair).

   Note: This setting routes all sound, including navigation clicks, from Apple TV to your HomePod. Only HomePod speakers can be selected for default audio output and home theater sound. If you temporarily select other speaker options (such as HomePod mini or other wireless speakers), home theater sound and navigation clicks are not supported and your speaker selection resets after Apple TV is put to sleep.

If you use a HomePod stereo pair, place the speakers on either side of the TV.

For the best surround sound, place HomePod (2018) within 10 inches of a wall and as close to the center of your TV as possible. For optimal surround sound, the HomePod speakers should be about 4 feet apart from each other.

When you connect AirPods (3rd generation), AirPods Pro, or AirPods Max to Apple TV 4K, you can turn on Spatial Audio to listen in an immersive theater-like environment with sound that surrounds you.

AirPods Pro and AirPods Max also offer controls for noise cancellation (to tune outside noises out), and transparency (to hear sounds around you).

Apple TV 4K detects AirPods when they’re turned on and nearby, and displays an onscreen notification to connect them.

1. Turn on your AirPods (3rd generation), AirPods Pro, or AirPods Max and hold them near to Apple TV 4K.

   If you don’t receive an onscreen notification, follow these instructions to connect them.

2. Press and hold the TV button on the Siri Remote to open Control Center.

3. Select the AirPods button .

4. Do any of the following:

   • Turn Spatial Audio (if available) on or off: Select Spatial Audio.

   • Choose what type of noise control you want (AirPods Pro or AirPods Max only): Select Noise Cancellation, Transparency, or Off.

To turn off automatic AirPods detection, open Settings on Apple TV, then go to Remotes and Devices > Bluetooth and turn off Suggest Nearby AirPods.

Additional AirPods preferences are available in Settings. See Set AirPods controls on Apple TV.

For private watching, you can send audio from an Apple TV 4K to up to two pairs of compatible Apple wireless headphones, such as AirPods or Powerbeats Pro.

1. Press and hold the TV button on the Siri Remote to open Control Center.

2. Select the Audio Controls button .

3. Navigate to headphones, then select the headphones you want to use.

   If you don’t see your headphones, follow the instructions in Find and connect to a nearby Bluetooth device.

4. Select Share Audio, then follow the onscreen instructions to pair the second pair of headphones.

If your Apple TV is connected to a home theater receiver or TV using an HDMI cable, you may experience audio latency, a delay that sounds like an echo when playing audio on both receiver speakers and a wireless speaker.

You can use an iPhone to calibrate the audio signal on your Apple TV so that all speakers play in sync.

1. Open Settings on Apple TV.

2. Go to Video and Audio, then scroll down to Calibration.

3. Select Wireless Audio Sync, then follow the onscreen instructions for using your iPhone to sync your speakers.

For more information, see Adjust video and audio settings on Apple TV.