iBet uBet web content aggregator. Adding the entire web to your favor.
iBet uBet web content aggregator. Adding the entire web to your favor.



Link to original content: https://en.wikipedia.org/wiki/Shell_plating
Shell plating - Wikipedia Jump to content

Shell plating

From Wikipedia, the free encyclopedia

Shell plating is the outer-most structure on the hull of a steel or aluminum ship or boat.

Strakes

[edit]
An autoCAD drawing of the various plating strakes on a convention hull.

A strake is the name given to each line of planking in a wooden vessel.[1] In modern ship construction it refers to the longitudinal run of plating covering the hull, deck and bulkhead structure. Certain specific strakes are uniquely identified:

Keel: is a special strake of the Bottom plating extending from the centerplane outboard.

Bottom: the Bottom Shell plate strakes extend from the Keel to the Bilge.

Bilge: is the plating which transitions from the more-or-less horizontal Bottom Shell to the more-or-less vertical Side Shell and is generally curved. See also Chine (boating).

Side: is the plating which extends from the Bilge strake(s) to the Shear strake.

Shear: is a special strake of the Side plating. It is the strake that connects the Side Shell to the Strength Deck.

Stringer: is a special strake of the Strength Deck plating. It is the strake that connects the Strength Deck to the Side Shell.

Strength Deck: is a special deck. It is normally the uppermost continuous deck and forms the top flange of the hull girder.

See also

[edit]

References

[edit]
  1. ^ Kemp, The Oxford Companion to Ships and the Sea , p. 838 (definition of 'strake').