Abstract
This paper presents an active fuzzy fault-tolerant control (FTC) strategy for induction motor that ensures the performances of the field-oriented control (FOC). In the proposed approach, a robust controller is synthesized in order to compensate for both the resistance variation, the load torque disturbance, and the sensor fault. The physical model of induction motor is approximated by the Takagi–Sugeno (T–S) fuzzy technique in the synchronous d-q rotating frame. Fuzzy descriptor observer is introduced to estimate simultaneously the system state and the sensor faults. A robust feedback state tracking control is proposed to guarantee the control performances by minimizing the effect of the load torque and the uncertainties. The proposed controller is based on a T–S reference model in which a desired trajectory has been specified. The performances of the trajectory tracking are analyzed using the Lyapunov theory and the \(L_2\) optimization. Observer and controller gains are obtained by solving a set of LMIs constraint. To highlight the effectiveness of the proposed control simulation, results are introduced for a 1.5 KW induction motor.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Blaschke, F.: The principle of field orientation applied to the transvector closed-loop control system for rotating fied machines. Seimens Rev. 34(5), 217–220 (1972)
Gouichiche, A., Boucherit, M.S., Safa, A., Messelem, Y.: Sensorless sliding mode vector control of induction motor drives. Int. J. Power Electron. Drive Syst. 2(3), 277–284 (2012)
Ichalal, D., Marx, B., Maquin, D., Ragot, J.: New fault tolerant control strategy for nonlinear systems with multiple model approach. In: Conference on Control and Fault-Tolerant Systems, pp. 606–611, France (2010)
Noura, H., Sauter, D., Hamelin, F., Theilliol, D.: Fault-tolerant control in dynamics systems: application to a winding machine. IEEE Control Syst. Mag. 20(1), 33–49 (2000)
Gertler, J.J.: Analytical Redundancy Methods in Fault Detection and Isolation— A Survey and Synthesis. In: Proceedings of IFAC Safeprocess Conference, 1, pp. 9–22, Baden-Baden (1991)
Chen, J., Patton, R.J., Zhang, H.: Design of unknown input observers and robust fault detection fillters. Int. J. Control 63(1), 85–105 (1996)
Sun, S., Wang, S., Wu, B.: Design of Luenberger robust fault detection observer. J. Zhejiang Univ. (Eng. Sci.) 38(6), 708–711 (2004)
Bouarrar, T., Marx, B., Maquin, D., Ragot, J.: Fault tolerant tracking control for continuous Takagi-Sugeno systems with time varying faults. In: 19th Mediterranean Conference on Control and Automation, pp. 1106–1111, Greece (2011)
Jiang, J.: Design of reconfigurable control systems using eigenstructure assignments. Int. J. Control 59(2), 1763–1781 (1994)
Gao, Z., Antasklis, P.J.: Stability of the pseudo-inverse method for reconfigurable control systems. Int. J. Control 53, 717–729 (1991)
Yue, G.H., Xiao-Ni, Z.: Realable \(H_\infty\) dynamic output feedback synthesis for linear systems. American Control Conference, 9, pp. 5546–5551 (2009)
Zhou, K., Khargonekar, P.P.: Robust stabilization of linear systems with norm-bounded time-varying uncertainty. Syst. Control Lett. 10(1), 17–20 (1998)
Tanaka, T., Sugeno, M.: Fuzzy identification of systems and its applications to modelling and control. IEEE Trans. Syst. Man Cyber. 155(1), 116–132 (1985)
Xie, X., Yue, D., Zhang, H., Xue, Y.: Control synthesis of discrete-time T-S fuzzy systems via a multi-instant homogenous polynomial approach. IEEE Trans. Cyber (2015). doi:10.1109/TCYB.2015.2411336
Xie, X.-P., Liu, Z.-W., Zhu, X.-L.: An efficient approach for reducing the conservatism of LMI-based stability conditions for continuous-time T-S fuzzy systems. Fuzzy Sets Syst. 263(1), 71–81 (2015)
Kairui, C., Gao, X.Z., Lam, H.K.: A new relaxed stability condition for Takagi-Sugeno fuzzy control systems using quadratic fuzzy Lyapunov functions and staircase membership functions. Int. J. Fuzzy Syst. 16(3), 327–337 (2014)
Micheal, K., Eugenio, B.C., Volter, J.S.L., Louis, F.P.S.: Fuzzy dynamic output feedback control throught nonlinear Takagi-Sugeno models. Fuzzy sets Syst. 263, 92–111 (2015)
Chang, W.-J., Tsai, Y.-S., Ku, C.-C.: Fuzzy fault tolerant control via Takagi-Sugeno fuzzy models for nonlinear systems with multiplicative noises. Int. J. Fuzzy Syst. 16(3), 338–349 (2014)
Hamdi, H., Rodrigues, M., Mechmeche, C., Benhadj, B.N.: Observer based fault tolerant control for Takagi-Sugeno nonlinear descriptor systems. Int. Conf. Control Eng. Inf. Technol. 1, 52–57 (2013)
Chamsedine, A., Theillol, D., Zhang, Y.M., Join, C., Rabbath, C.: A active fault tolerant control system design with trajectory replaning against actuator faults and saturation: application to a quadratic unmanned arial vehicle. Int. J. Adapt. Control Signal Process. 29, 1–23 (2015)
Badihi, H., Youmin, Z., Hong, H.: Fuzzy gain—sheduled active fault tolerant control of a wind turbine. J. Frinkl. Inst. 351, 3677–3706 (2014)
Shaker, M.S., Patton, R.J.: Wind tubine power maximisation based on adaptive sensor fault sliding mode control. In: Proceeding of the 20th Mediterranean Conference on Control and Automation, Barcelona, 3–6 July, pp. 1183–1188
Xiao, B., Qinglei, H., Youmin, Z.: Adaptive sliding mode fault tolerant attitude tracking control for flexible spacecraft under actuator saturation. IEEE Trans. Control Syst. Technol. 20(6), 1605–1612 (2012)
Chadli, M., Aouaouda, S., Karimi, H.R., Shi, P.: Robust fault tolerant tracking controller design for a VTOL aircraft. J. Frankl. Inst. 350, 2627–2645 (2013)
Bouarar, T., Marx, B., Maquin, D., Ragot, J.: Fault-tolerant control design for uncertain Takagi-Sugeno systems by trajectory tracking: a descriptor approach. Control Theory Appl. IET 7(14), 1793–1805 (2013)
Aouaouda, S., Chadli, M., Khadir, M.T., Bouarar, T.: Robust fault tolerant tracking controller design for unknown inputs T-S models with unmeasurable premise variables. J. Process Control 22(5), 861–872 (2012)
Oudghiri, M., Chadli, M., El Hajjaji, A.: Robust observer-based fault-tolerant control for vehicle lateral dynamics. Int. J. Veh. Des. 48(3), 173–189 (2008)
Shaker, M.S., Patton, R.J.: Active sensor fault tolernat output feedback tracking control for wind turbine systems via T-S model. Eng. Appl. Artif. Intell. 34, 1–12 (2014)
Kamel, E., Aitouche, A.: Robust fault tolerant control of DFIG wind energy systems with unknown inputs. Renew. Energy 56, 2–15 (2013)
Aouaouda, S., Chadli, M., Cocquempot, V., Khadir, M.T.: Multi-objective \(H_ - /H_\infty\) fault detection observer design for Takagi-Sugeno fuzzy systems with unmesurables premise variables: descriptor approach. Int. J. Adapt. Control Signal Process. 27(12), 1031–1047 (2012)
Bouattour, M., Chadli, M., Chaabane, M., El Hajjaji, A.: Design of robust fault detection observer for Takagi-Sugeno models using the descriptor approach. Int. J. Control Autom. Syst. 9(5), 973–979 (2011)
Aouaouda, S., Chadli, M., Karimi, H.-R.: Robust static output-feedback controller design against sensor failure for vehicle dynamics. J. Control Theory Appl. IET 8(9), 728–737 (2014)
Ghorbel, H., El Hajjaji, A., Souissi, M., Chaabane, M.: Robust static output-feedback controller design against sensor failure for vehicle dynamics. J. Circuits Syst. Signal Process. 33, 1763–1781 (2014)
Campos-Delgado, D.U., Espinoza-Trejo, D.R., Palacios, E.: Fault tolerant control in variable speed drives: a survey. IET Electr. Power Appl. 2(2), 121–134 (2008)
Djeghali, N., Ghanes, M., Djennoune, S., Parbot, J.P., Tajdine, M.: Fault Tolerant Control For Induction Motors Using Sliding Mode Observers. International Workshop on variable structure systems, pp. 190–196, Mexico (2010)
Djeghali, N., Ghanes, M., Djennoune, S., Parbot, J.P.: Sensor fault tolerant control for induction motors. Int. J. Control Autom. Syst. 11(3), 563–576 (2013)
Tabbache, B., Rizoug, N., Benbouzid, M., Kheloui, A.: A control regonfuguration strategy for post-sensor FTC in induction motor-based EVs. IEEE Trans. Veh. Technol. 62(3), 965–971 (2013)
Mendes, A.M.S.: Fault-tolerant control operating strategies applied to three-phase induction-motors drives. IEEE Trans. Ind. Electron. 53(6), 1807–1817 (2006)
Boniventoa, C., Isidoria, A., Marconia, L., Paolia, A.: Implicit fault-tolerant control: application to induction motors. Automatica 40(3), 355–371 (2004)
Benzoubid, M.E., Diallo, D., Zeraoulia, M.: Advenced fault tolerant control of induction motor drive for EV/HEV tracion application: from conventional to modern and intelligent control techniques. IEEE Trans. Veh. Technol. 56(2), 519–528 (2007)
Allouche, M., Chaabane, M., Souissi, M., Mehdi, D., Tadeo, F.: State feedback tracking control for indirect fieled-oriented induction motor using Fuzzy approach. Int. J. Autom. Comput. 10, 99–110 (2013)
Guerra, T., Kruszewski, A., Vermeiren, L., Tirmant, H.: Conditions of output stabilization for non linear models in the Takagi-Sugeno form. Fuzzy Sets Syst. 157(9), 1248–1259 (2006)
Li, H., Yin, S., Pan, Y., Lam, H.-K.: Model reduction for interval type-2 Takagi Sugeno fuzzy systems. Automatica 61, 308–314 (2015)
Hossein, H., Jafar, Z.: Interval Type-2 fuzzy logic controller design for the speed control of DC motors. J. Syst. Sci. Control Eng. 3(1), 266–273 (2015)
Tao, Z., Jian, X.: State feedback control of interval type-2 Takagi-Sugeno fuzzy systems via interval type-2 regional switching fuzzy controllers. Int. J. Syst. Sci. 46(15), 2756–2769 (2015)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ben Zina, H., Allouche, M., Souissi, M. et al. Robust Sensor Fault-Tolerant Control of Induction Motor Drive. Int. J. Fuzzy Syst. 19, 155–166 (2017). https://doi.org/10.1007/s40815-016-0148-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40815-016-0148-2