default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCIDInternational Journal of Automation Technology, Volume 9
Volume 9, Number 1, January 2015
- Yasuhiko Murata, Masayoshi Koike, Song Pan:
Improving the Properties of Injection Molded Products with Induction Heating and Cooling Molds. 3-9 - Tetsushi Kaburagi, Masashi Kurose, Takahiro Ogawa, Hiroki Kuroiwa, Tomoyuki Iwasawa:
Investigation of Flow and Sink Initiation Process in Mold Shapes in Injection Molding. 10-18 - Feng Gao:
Solving Slug Pulling Problem Using High-Pressure Air Generated by a Compression Unit Installed Inside a Die Set. 19-25 - Hirofumi Suzuki, Mutsumi Okada, Koichi Okada, Yosuke Ito:
Precision Cutting of Ceramics with Milling Tool of Single Crystalline Diamond. 26-32 - Wei Wu, Shun Kinoshita, Toshiki Hirogaki, Eiichi Aoyama:
Detection of Motion Error Under Synchronous Two-Axis Control of a Dual Arm Robot Based on Monitoring of Ball Rolling Motion on a Plate. 33-42 - Sergey Bolotov
, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
Fabrication of Precision Micrograting on Resin Substrate Utilizing Ultrasonic-Assisted Molding. 43-50 - Keiji Ogawa, Toshiki Hirogaki, Shreyes N. Melkote, Sachiko Ogawa:
A Process Decision Making Strategy Based on Sustainability Evaluation. 51-58 - Shoichi Tamura, Takashi Matsumura:
Cutting Force Prediction in Drilling of Unidirectional Carbon Fiber Reinforced Plastics. 59-66 - Khoa Duy Le, Hung Duc Nguyen, Dev Ranmuthugala:
Development and Control of a Low-Cost, Three-Thruster, Remotely Operated Underwater Vehicle. 67-75 - Jung-Ho Park, In-Seob Park, So-Nam Yun, Young-Bog Ham, Pil-Woo Heo, Sung-Cheol Jang:
A Collector of Dissolved Air Using Centrifugal Separation for Underwater Breathing. 76-82 - Keiichi Nakamoto, Tomohiro Iizuka, Yoshimi Takeuchi:
Dexterous Machining of Soft Objects by Means of Flexible Clamper. 83-88
Volume 9, Number 2, March 2015
- Yusuf Altintas:
Editorial: Virtual Manufacturing. 103 - Mohammad Mi'radj Isnaini, Yusaku Shinoki, Ryuta Sato, Keiichi Shirase:
Development of a CAD-CAM Interaction System to Generate a Flexible Machining Process Plan. 104-114 - Hirohisa Narita:
A Method for Using a Virtual Machining Simulation to Consider Both Equivalent CO2 Emissions and Machining Costs in Determining Cutting Conditions. 115-121 - Jun Wang, Soichi Ibaraki, Atsushi Matsubara, Kosuke Shida, Takayuki Yamada:
FEM-Based Simulation for Workpiece Deformation in Thin-Wall Milling. 122-128 - Michael Friedrich Zäh, Oliver Roesch:
Improvement of the Static and Dynamic Behavior of a Milling Robot. 129-133
- Yohei Oda, Makoto Fujishima, Yoshimi Takeuchi:
Energy-Saving Machining of Multi-Functional Machine Tools. 135-142 - Mashruk Ahamad, Dinh Quang Truong, Syed Abu Nahian, Kyoung Kwan Ahn:
Development of a New Generation of Independent Metering Valve Circuit for Hydraulic Boom Cylinder Control. 143-152 - Atsushi Ito, Eiji Shamoto:
An Innovative Machining Strategy for Efficient Peripheral Finishing of Hard Materials with Highly-Varied-Helix End Mill. 153-160 - Ivan Burdukovskyi, Jun'ichi Kaneko, Kenichiro Horio:
Configuration Method of Fixing System with 2-Dimensionally Low-Frequency Vibration for Drilling to Decrease Influence from Unintended Displacement of Workpiece. 161-169 - Otto Jusko, Michael Neugebauer, Helge Reimann, Ralf Bernhardt:
Recent Progress in CMM-Based Form Measurement. 170-175 - Kazuhito Ohashi, Kazuya Tan, Tomoya Ashida, Shinya Tsukamoto:
Quick On-Machine Measurement of Ground Surface Finish Available for Mass Production Cylindrical Grinding Processes. 176-183 - Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada:
Back-Pressure Forging Using a Servo Die Cushion. 184-192
Volume 9, Number 3, May 2015
- Nobuhiro Sugimura, Koji Iwamura, Tomohiko Maeda:
Editorial: Production Planning and Scheduling. 209 - Hengchang Jing:
Node Deployment Algorithm Based on Perception Model of Wireless Sensor Network. 210-215 - Daisuke Morita, Haruhiko Suwa:
An Exact Method for Robust Capacity Requirements Planning. 216-221 - Kenju Akai, Yuji Kageyama, Kaoru Sato, Nariaki Nishino, Kazuro Kageyama:
AHP Analysis of the Preference of Engineers for Suitable CFRP for Automobile Parts. 222-234 - Taiki Ogata, Tsuyoshi Okubo, Hidetoshi Nagai, Masashi Yamamoto, Masao Sugi, Jun Ota:
A Novel Algorithm for Continuous Steel Casting Scheduling with Focus on Quality Property Constraint and Slab Width Maximization. 235-247 - Hironori Hibino, Yoshiro Fukuda, Yoshiyuki Yura:
A Synchronization Mechanism with Shared Storage Model for Distributed Manufacturing Simulation Systems. 248-260 - Yasuhiro Sudo, Michiko Matsuda:
Autonomous Assembly Process Planning According to the Production Line Configuration. 261-269 - Lennart Bochmann, Lars Gehrke, Adrian Böckenkamp, Frank Weichert, Rainer Albersmann, Christian Prasse, Christoph Mertens, Marco Motta, Konrad Wegener:
Towards Decentralized Production: A Novel Method to Identify Flexibility Potentials in Production Sequences Based on Flexibility Graphs. 270-282
- To Xuan Dinh, Ngoc Chi Nam Doan, Kyoung Kwan Ahn:
Robust Attitude Control and Virtual Reality Model for Quadrotor. 283-290 - Yuki Shimizu, Yuta Ohba, Wei Gao:
Investigation on Sensitivity of a Contact-Type Thermal Sensor for Surface Defect Inspections. 291-296 - Hiroshi Mizumoto, Yoichi Tazoe, Tomohiro Hirose, Katsuhiko Atoji:
Performance of High-Speed Precision Air-Bearing Spindle with Active Aerodynamic Bearing. 297-302 - Tomomi Nonaka, Nobutada Fujii:
An EOQ Model for Reuse and Recycling Considering the Balance of Supply and Demand. 303-311 - Mohamed Elrawemi, Liam Blunt, Hussam Muhamedsalih, Feng Gao, Leigh Fleming:
Implementation of in Process Surface Metrology for R2R Flexible PV Barrier Films. 312-321 - Rui-Yin Tang, Hong-Kun He, Zhoumo Zeng, Feng Gao:
Calibration of Double Priority Camera Based on Circle Planar Target. 322-329
Volume 9, Number 4, July 2015
- Stefano Menotti, Giuliano Bissacco, Hans Nørgaard Hansen, Peter Torben Tang, Christian Ravn:
Characterization Methods of Nano-Patterned Surfaces Generated by Induction Heating Assisted Injection Molding. 349-355 - Satoru Maegawa, Yuta Morikawa, Shinya Hayakawa, Fumihiro Itoigawa, Takashi Nakamura:
Effects of Fiber Orientation Direction on Tool-Wear Processes in Down-Milling of Carbon Fiber-Reinforced Plastic Laminates. 356-364 - Masakazu Fujimoto, Yongbo Wu, Mitsuyoshi Nomura, Hidenari Kanai, Masahiko Jin:
Wear Behavior of Grain Cutting Edge in Ultrasonic Assisted Grinding Using Mini-Size Wheel. 365-372 - Kohei Kato, Hiroaki Seki, Masatoshi Hikizu:
3-D Obstacle Detection Using Laser Range Finder with Polygonal Mirror for Powered Wheelchair. 373-380 - Tatsuya Kume, Masanori Satoh, Tsuyoshi Suwada, Kazuro Furukawa, Eiki Okuyama:
Elimination of Gyro Drift by Using Reversal Measurement. 381-386 - Soichi Ibaraki, Yu Nagai, Hisashi Otsubo, Yasutaka Sakai, Shigeki Morimoto, Yosuke Miyazaki:
R-Test Analysis Software for Error Calibration of Five-Axis Machine Tools - Application to a Five-Axis Machine Tool with Two Rotary Axes on the Tool Side -. 387-395 - Kazuma Asakura, Jiwang Yan:
Water Repellency Control of Oxygen-Free Copper Surface by Diamond-Cut Micro Grooves. 396-402 - Tomoya Hida, Tetsuya Asano, Kazuhiro Nishita, Norio Sakai, Akinobu Goto, Yoshimi Takeuchi:
Development of Online Real-Time Collision Free Machining Using Simulation with CNC Openness. 403-410 - Arata Kaneko, Hiromichi Murakami, Takahiro Yamashita:
Effect of Surface Property on Transfer-Print of Au Thin-Film to Micro-Structured Substrate. 411-417 - Fumitaka Motomura:
Micro Drilling Simulation of Ultra-Short Pulsed Laser Ablation of Glass. 418-424 - Berend Denkena, Martin Eckl, Thomas Lepper:
Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines. 425-435 - Yusuke Horikawa, Akio Mizutani, Tomoaki Noda, Hisao Kikuta:
Stereo Camera System with Digital Image Correlation Method for Accurate Measurement of Position and Orientation of Positioning Stage. 436-443
Volume 9, Number 5, September 2015
- Masato Aketagawa:
Editorial: Laser Metrology for Precision Measurement and Inspection in Industry. 465-459 - Bart Boeckmans, Min Zhang, Frank Welkenhuyzen, Jean-Pierre Kruth:
Determination of Aspect Ratio Limitations, Accuracy and Repeatability of a Laser Line Scanning CMM Probe. 466-472 - Qianbo Lu, Wenxiu Lian, Shuqi Lou, Chen Wang, Jian Bai, Guoguang Yang:
A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure. 473-481 - Hirokazu Matsumoto, Kiyoshi Takamasu:
Automatic Recording Absolute Length-Measuring System with Fast Optical-Comb Fiber Interferometer. 482-486 - Ichiro Ogura, Kiwamu Ashida, Jun Akedo:
Development of First Production Flaw Detecting System for On-Demand Repair of Large-Scale Circuit. 487-493 - Qinghua Wang, Hiroshi Tsuda, Satoshi Kishimoto, Yoshihisa Tanaka, Yutaka Kagawa:
Moiré Techniques Based on Memory Function of Laser Scanning Microscope for Deformation Measurement at Micron/Submicron Scales. 494-501 - Zi Xue, Yao Huang, Heyan Wang, Hu Lin:
Calibration of Invar Angular Interferometer Optics with Multi-Step Method. 502-507 - Yuri V. Chugui, Elena S. Senchenko:
3D Image Formation in Transmitted Partially Coherent and Incoherent Light Applied to Dimensional Inspection. 508-514 - Yuri V. Chugui, Alexander G. Verkhoglyad, Petr S. Zavyalov, Evgeny V. Sysoev, Rodion V. Kulikov, Ignat A. Vykhristyuk, Marina A. Zavyalova, Alexander G. Poleshchuk, Victor P. Korolkov:
Optical Measuring and Laser Technologies for Scientific and Industrial Applications. 515-524 - Osamu Sato, Hiroyuki Fujimoto, Sonko Osawa, Makoto Abe, Toshiyuki Takatsuji:
Simple Interim Check of Measuring Performance for X-Ray Computed Tomography Used as Coordinate Measuring System. 525-529 - Adam Wozniak, Grzegorz Krajewski:
CMM Dynamic Properties of the Scanning Measurement of a 2D Profile. 530-533 - Terutake Hayashi, Yuki Ishizaki, Masaki Michihata, Yasuhiro Takaya, Shin'ichi Tanaka:
Study on Nanoparticle Sizing Using Fluorescent Polarization Method with DNA Fluorescent Probe. 534-540 - Mariko Kajima, Tsukasa Watanabe, Makoto Abe, Toshiyuki Takatsuji:
Calibrator for 2D Grid Plate Using Imaging Coordinate Measuring Machine with Laser Interferometers. 541-545 - Kazuhiro Enami:
Calibration Using Cylindrical Artifacts for 3D Laser Measurement System. 546-550 - Hiroki Shimizu, Atsuo Ogawa, Yoshinori Sasaki, Yuuma Tamaru:
Property Evaluation of Eccentric Astigmatic Method to Apply Micro Tactile Probe. 551-557 - Alexander Schöch, Alessandro Salvadori, Ivo Germann, Silvano Balemi, Carlo Bach, Andrea Ghiotti, Simone Carmignato, Andrea Lelio Maurizio, Enrico Savio:
High-Speed Measurement of Complex Shaped Parts at Elevated Temperature by Laser Triangulation. 558-566 - Hiroyuki Fujimoto, Makoto Abe, Sonko Osawa, Osamu Sato, Toshiyuki Takatsuji:
Development of Dimensional X-Ray Computed Tomography. 567-571
- Michio Uneda, Keiichi Takano, Koji Koyama, Hideo Aida, Ken-Ichi Ishikawa:
Investigation into Chemical Mechanical Polishing Mechanism of Hard-to-Process Materials Using a Commercially Available Single-Sided Polisher. 573-579 - Xipeng Zhang, Hiroaki Seki, Masatoshi Hikizu:
Detection of Human Position and Motion by Thermopile Infrared Sensor. 580-587 - Yoshihisa Uchida:
Development of a Wide-Range Precision Positioning Sensor Based on Image Analysis of Diffracted Light. 588-592
Volume 9, Number 6, November 2015
- Seiichi Hata:
Editorial: Micro-Nano Materials and Processing. 611 - Mizue Mizoshiri, Masashi Mikami, Kimihiro Ozaki:
Fabrication Process of Antimony Telluride and Bismuth Telluride Micro Thermoelectric Generator. 612-618 - Ren-Jung Chang, Jia-Cheng Jau:
Error Measurement and Calibration in Developing Virtual-Reality-Assisted Microassembly System. 619-628 - Potejana Potejanasak, Masahiko Yoshino, Motoki Terano, Masahiro Mita:
Efficient Fabrication Process of Metal Nanodot Arrays Using Direct Nanoimprinting Method with a Polymer Mold. 629-635 - Takafumi Komatsu:
Effects of Grain Size on the Groove Depths in Microlaser Cutting of Austenitic Stainless Steel SUS304. 636-645 - Shigetaka Watanabe, Junpei Sakurai, Mizue Mizoshiri, Seiichi Hata:
Reverse Lift-Off Process and Application for Cu-Zr-Ti Metallic Glass Thick Film Structures. 646-654 - Masato Suzuki, Takahiro Sawa, Tomokazu Takahashi, Seiji Aoyagi:
Fabrication of Microneedle Mimicking Mosquito Proboscis Using Nanoscale 3D Laser Lithography System. 655-661 - Junpei Sakurai, Seiichi Hata:
Characteristics of Ti-Ni-Zr Thin Film Metallic Glasses / Thin Film Shape Memory Alloys for Micro Actuators with Three-Dimensional Structures. 662-667 - Yuko Aono, Wataru Shinohara, Hitoshi Tokura:
Laser Modification of Silicon and Borosilicate Glass Wettability for Micro-Fluidic Systems. 668-673 - Manabu Yasui, Satoru Kaneko, Masaharu Takahashi, Takashi Sano, Yasuo Hirabayashi, Takeshi Ozawa, Ryutaro Maeda:
Micro Imprinting for Al Alloy Using Ni-W Electroformed Mold. 674-677
- Hidenori Shinno:
Editorial: Machine Tool Structure and its Design Optimization. 679 - Kotaro Mori, Daisuke Kono, Iwao Yamaji, Atsushi Matsubara:
Support Placement for Machine Tools Using Stiffness Model. 680-688 - Ryuta Sato, Gen Tashiro, Keiichi Shirase:
Analysis of the Coupled Vibration Between Feed Drive Systems and Machine Tool Structure. 689-697 - Shoichi Morimura:
Development of New Spindle Cooling Technology That Concentrates Cooling Near Front Bearing. 698-706 - Kenichi Nakanishi, Manabu Sawada, Jiro Sakamoto:
A Newly Developed Multi-Axis Controlled Turning Machine Equipped with a Swing Type Turret Head. 707-713 - Ikuo Tanabe:
Development of Technology for Creating Composite Materials of Machine Tool. 714-719 - Naohiko Suzuki, Yoshitaka Morimoto, Keigo Takasugi, Ryo Kobashi, Ryo Hirono, Yoshiyuki Kaneko, Yutaka Tokuno:
Development of Desktop Machine Tool with Pipe Frame Structure. 720-730 - Conrad W. P. Fischbach, Michael F. Zaeh, Martin Mair:
Identifying the Benefits of Fiber Reinforced Plastics for Their Use in Machine Tool Structures. 731-738 - Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano:
A Low-Profile Planar Motion Table System Driven by Steel Belt. 739-745
- Satoshi Niitsu, Ryosuke Tamura, Hiroyuki Hiraoka:
Detection of Contact Point of Parts Using a Force Sensor for Remote-Controlled Assembly Using a 1DOF Haptic Device. 747-755 - Yusuke Imai, Seungki Kim, Hiroyuki Hiraoka, Hiroshi Kawaharada:
Edge-Based Quadrilateral Mesh Fitting Using Normal Vector Diffusion. 756-764 - Wanjin Guo, Ruifeng Li, Chuqing Cao, Yunfeng Gao:
Kinematics Analysis of a Novel 5-DOF Hybrid Manipulator. 765-774 - Norfariza Wahab, Yumi Inatsugu, Satoshi Kubota, Soo-Young Kim, Hiroyuki Sasahara:
An Integral Method to Determine Workpiece Flow Stress and Friction Characteristics in Metal Cutting. 775-781
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-13 19:01 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
