{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,8,7]],"date-time":"2024-08-07T01:01:43Z","timestamp":1722992503161},"reference-count":22,"publisher":"Fuji Technology Press Ltd.","issue":"6","content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["Int. J. Automation Technol.","IJAT"],"published-print":{"date-parts":[[2015,11,5]]},"abstract":"Over the last decade, developments of fine grained materials and investigations of the effects of grain size on mechanical processing at the micro scale have been reported. There are several papers and reports on the function improvements achieved due to enhanced edge quality. However, it is difficult to identify the studies about the effects of grain size on the processed surface in laser processing because ultrafine grain materials were not supplied in the market. In this study, the effect of grain size on the depth of groove by laser processing is investigated. Microgrooves are produced using a picosecond laser machine. The grooves are observed with a non-contact 3D measuring machine, and the depth and surface conditions are determined. There are obvious differences on the depth between the different grain sizes. Specimens were cut to allow the observation of the phase transformation of grains in the cross section using scanning electron microscope (SEM) and electron back scatter diffraction (EBSD). There are several obstacles when producing deeper grooves. As a result, smaller grained stainless steels are suitable for producing microparts by microlaser cutting.<\/jats:p>","DOI":"10.20965\/ijat.2015.p0636","type":"journal-article","created":{"date-parts":[[2016,4,14]],"date-time":"2016-04-14T02:04:52Z","timestamp":1460599492000},"page":"636-645","source":"Crossref","is-referenced-by-count":6,"title":["Effects of Grain Size on the Groove Depths in Microlaser Cutting of Austenitic Stainless Steel SUS304"],"prefix":"10.20965","volume":"9","author":[{"given":"Takafumi","family":"Komatsu","sequence":"first","affiliation":[]},{"name":"Komatsuseiki Kosakusho Co., Ltd.","sequence":"first","affiliation":[]}],"member":"8550","published-online":{"date-parts":[[2015,11,5]]},"reference":[{"key":"key-10.20965\/ijat.2015.p0636-1","doi-asserted-by":"crossref","unstructured":"\u00a0\tF. Vollertsen, D. Biermann, H. N. Hansen, I. S. Jawahir, and K. Kuzman, \u201cSize effects in manufacturing of metallic components,\u201d CIRP Annals-Manufacturing Technology, Vol.58, No.2, pp. 566-587, 2009.","DOI":"10.1016\/j.cirp.2009.09.002"},{"key":"key-10.20965\/ijat.2015.p0636-2","doi-asserted-by":"crossref","unstructured":"\u00a0\tS. H. Wang (Ed.), \u201cNanostructured metals and alloys,\u201d Woodhead Publishing Limited, pp. 747-786, 2011.","DOI":"10.1533\/9780857091123.4.747"},{"key":"key-10.20965\/ijat.2015.p0636-3","doi-asserted-by":"crossref","unstructured":"\u00a0\tY. Saotome, \u201cState of the Art in Micro Forming and View in the Future,\u201d Journal of the Japan Society for Technology of Plasticity, Vol.49, No.570, pp. 614-618, 2008.","DOI":"10.9773\/sosei.49.614"},{"key":"key-10.20965\/ijat.2015.p0636-4","doi-asserted-by":"crossref","unstructured":"\u00a0\tN. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa, \u201cUltra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process,\u201d Scripta Materialia, Vol.40, No.7, pp. 795-800, 1999.","DOI":"10.1016\/S1359-6462(99)00015-9"},{"key":"key-10.20965\/ijat.2015.p0636-5","doi-asserted-by":"crossref","unstructured":"\u00a0\tA. D.Schino, M. Barteri, and J. M. Kenny, \u201cDevelopment of ultra fine grain structure by martensitic reversion in stainless steel,\u201d Journal of materials science letters, Vol.21, No.9, pp. 751-753, 2002.","DOI":"10.1023\/A:1015757710546"},{"key":"key-10.20965\/ijat.2015.p0636-6","doi-asserted-by":"crossref","unstructured":"\u00a0\tI. Salvatori, T.Inoue, and K. Nagai, \u201cUltrafine grain structure through dynamic recrystallization for Type 304 stainless steel,\u201d ISIJ int., Vol.42, No.7, pp. 744-750, 2002.","DOI":"10.2355\/isijinternational.42.744"},{"key":"key-10.20965\/ijat.2015.p0636-7","doi-asserted-by":"crossref","unstructured":"\u00a0\tS. Torizuka, E. Muramatsu, S. N. Murty, and K. Nagai, \u201cMicrostructure evolution and strength-reduction in area balance of ultrafine-grained steels processed by warm caliber rolling,\u201d Scripta materialia, Vol.55, No.8, pp. 751-754. 2006.","DOI":"10.1016\/j.scriptamat.2006.03.067"},{"key":"key-10.20965\/ijat.2015.p0636-8","doi-asserted-by":"crossref","unstructured":"\u00a0\tA. Belyakov, T. Sakai, and H. Miura, \u201cFine-Grained Structure Formation in Austenitic Stainless Steel under Multiple Deformation at 0.5T m,\u201d Materials Trans., Vol.41, No.4, pp. 476-484. 2000.","DOI":"10.2320\/matertrans1989.41.476"},{"key":"key-10.20965\/ijat.2015.p0636-9","unstructured":"\u00a0\tS. Takagi and M. Tomita, \u201cUltra-fine grain steel,\u201d Kogyo Zairyo (Engineering Materials), Vol.54, No.1, pp. 30-31, 2006."},{"key":"key-10.20965\/ijat.2015.p0636-10","doi-asserted-by":"crossref","unstructured":"\u00a0\tT. Komatsu, H. Kobayashi, S. Torizuka, and S. Nagayama, \u201cMicro Hole Piercing for Ultra Fine Grained Steel,\u201d Materials Science Forum, Vol.783, pp. 2653-2658, 2014.","DOI":"10.4028\/www.scientific.net\/MSF.783-786.2653"},{"key":"key-10.20965\/ijat.2015.p0636-11","doi-asserted-by":"crossref","unstructured":"\u00a0\tT. Komatsu, M. Komatsu, H. Yanagisawa, T. Uehara, T. Yanagisawa, and S. Manabe, \u201cDevelopment of Advanced Stamping Process of Orifice Plate for Electric Controlled Fuel Injector \u2013 Contribution of Small Parts to Environment\u2013,\u201d Journal of the Japan Society for Technology of Plasticity, Vol.52, No.611, pp. 1281-1285, 2011.","DOI":"10.9773\/sosei.52.1281"},{"key":"key-10.20965\/ijat.2015.p0636-12","doi-asserted-by":"crossref","unstructured":"\u00a0\tM. Katoh, T. Shiratori, Y. Suzuki, S. Nakano, and T. Komatsu, \u201cDeformation of Material in Punching of Slanted Fine Hole in SUS304 Sheets with Fine-grained Microstructure,\u201d Journal of the Japan Society for Technology of Plasticity, Vol.55, No.638, pp. 223-227. 2014.","DOI":"10.9773\/sosei.55.223"},{"key":"key-10.20965\/ijat.2015.p0636-13","doi-asserted-by":"crossref","unstructured":"\u00a0\tS. Torizuka, E. Muramatsu, T. Komatsu, and S. Nagayama, \u201cCharacterization of Sheared Edge of Ultrafine-Grained Steel,\u201d Journal of the Japan Society for Technology of Plasticity, Vol.55, No.642, pp. 626-632, 2014.","DOI":"10.9773\/sosei.55.626"},{"key":"key-10.20965\/ijat.2015.p0636-14","doi-asserted-by":"crossref","unstructured":"\u00a0\tT. Komatsu, T. Matsumura, and S. Torizuka, \u201cEffect of grain size in stainless steel on cutting performance in micro-scale cutting,\u201d Int. Journal of Automation Technology, Vol.5, No.3, pp. 334-341. 2011.","DOI":"10.20965\/ijat.2011.p0334"},{"key":"key-10.20965\/ijat.2015.p0636-15","doi-asserted-by":"crossref","unstructured":"\u00a0\tT. Komatsu, T. Yoshino, T. Matsumura, and S. Torizuka, \u201cEffect of crystal grain size in stainless steel on cutting process in micromilling,\u201d Proc. CIRP, Vol.1, pp. 150-155, 2012.","DOI":"10.1016\/j.procir.2012.04.026"},{"key":"key-10.20965\/ijat.2015.p0636-16","unstructured":"\u00a0\tT. Komatsu, T. Yoshino, S. Torizuka, and T. Matsumura, \u201cEffect on stainless steel surfaces form micro cutting in different grain size,\u201d Int. Conf. on Micro Manufacturing, No.116, 2014."},{"key":"key-10.20965\/ijat.2015.p0636-17","doi-asserted-by":"crossref","unstructured":"\u00a0\tF. Siegel, U. Klug, R. Kling, and A. Ostendorf, \u201cExtensive micro-structuring of metals using picosecond pulses \u2013 Ablation behavior and industrial relevance,\u201d Journal of Laser Micro\/Nanoengineering, Vol.4, No.2, pp. 104-110, 2009.","DOI":"10.2961\/jlmn.2009.02.0006"},{"key":"key-10.20965\/ijat.2015.p0636-18","unstructured":"\u00a0\tM. Fujita and M. Hashida, \u201cFemtosecond-Laser Processing,\u201d Journal of Plasma Fusion, Vol.81, pp. 195-201, 2005."},{"key":"key-10.20965\/ijat.2015.p0636-19","doi-asserted-by":"crossref","unstructured":"\u00a0\tT. J.Wieting and J. L. DeRosa, \u201cEffects of surface condition on the infrared absorptivity of 304 stainless steel,\u201d Journal of Applied Physics, Vol.50, No.2, pp. 1071-1078, 1979.","DOI":"10.1063\/1.326083"},{"key":"key-10.20965\/ijat.2015.p0636-20","doi-asserted-by":"crossref","unstructured":"\u00a0\tZ. Guosheng, P. M. Fauchet, and A. E. Siegman, \u201cGrowth of spontaneous periodic surface structures on solids during laser illumination,\u201d Physical Review B, Vol.26, No.10, pp. 5366, 1982.","DOI":"10.1103\/PhysRevB.26.5366"},{"key":"key-10.20965\/ijat.2015.p0636-21","doi-asserted-by":"crossref","unstructured":"\u00a0\tP. T.Mannion, J. Magee, E. Coyne, G. M. O\u2019Connor, and T. J. Glynn, \u201cThe effect of damage accumulation behavior on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air,\u201d Applied surface science, Vol.233, No.1, pp. 275-287, 2004.","DOI":"10.1016\/j.apsusc.2004.03.229"},{"key":"key-10.20965\/ijat.2015.p0636-22","doi-asserted-by":"crossref","unstructured":"\u00a0\tC. S.Lee, N. Koumvakalis, and M. Bass, \u201cSpot size dependence of laser induced damage to diamond turned Cu mirrors,\u201d Applied Physics Letters, Vol.41, No.7, pp. 625-627, 1982.","DOI":"10.1063\/1.93629"}],"container-title":["International Journal of Automation Technology"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/www.fujipress.jp\/main\/wp-content\/themes\/Fujipress\/phyosetsu.php?ppno=IJATE000900060004","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2017,6,16]],"date-time":"2017-06-16T01:57:02Z","timestamp":1497578222000},"score":1,"resource":{"primary":{"URL":"https:\/\/www.fujipress.jp\/ijat\/au\/ijate000900060636"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2015,11,5]]},"references-count":22,"journal-issue":{"issue":"6","published-online":{"date-parts":[[2015,11,5]]},"published-print":{"date-parts":[[2015,11,5]]}},"URL":"https:\/\/doi.org\/10.20965\/ijat.2015.p0636","relation":{},"ISSN":["1883-8022","1881-7629"],"issn-type":[{"type":"electronic","value":"1883-8022"},{"type":"print","value":"1881-7629"}],"subject":[],"published":{"date-parts":[[2015,11,5]]}}}
