This tutorial was written for the NVIDIA Jetson Orin Nano Developer Kit (8 GB). The tutorial was written on 2024-2-13:19-42-5. Details of the board are:

IMPORTANT WARNING: The host must be running on Ubuntu 20.04 to flash the board.

The board can be flashed using the SDK Manager. The SDK Manager can be downloaded from the NVIDIA website. To flash the board, force the board into recovery mode by following the steps in JetsonHacks Tutorial. Then, select the following options:

• Host Machine: Ubuntu 20.04
• Target Hardware: Jetson Orin Nano Developer Kit 8 GB
• Target OS: Jetpack 6.0 DP
• DeepStream: 6.0

In my case, I had already mounted an NVME SSD as a storage component. Most tutorials do SD cards, but I went with a mainstream 1 TB NVME SSD for performance reasons. Select the pre-config option to set the board and initialize it with a username and a password. For simplicity, the username and password are set to nvidia. The board will be flashed, and it will be ready to use.

First, update the system:

sudo apt-get update
sudo apt-get upgrade
sudo reboot

Then, install the following packages:

sudo apt-get upgrade
sudo apt-get install python3 python3-dev python3-distutils python3-venv python3-pip
sudo apt-get install ssh firefox zlib1g software-properties-common lsb-release cmake build-essential libtool autoconf unzip wget htop ninja-build terminator zip

These packages will prepare the board for development. If you are working extensively with Python, install conda package manager. The following commands will install miniconda:

cd Downloads/
sudo apt upgrade
wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-aarch64.sh
chmod +x Miniconda3-latest-Linux-aarch64.sh
./Miniconda3-latest-Linux-aarch64.sh

Before we advance on checking CUDA and cuDNN, we need to verify gcc and nvidia-smi:

gcc --version
nvidia-smi

We will begin with checking CUDA:

git clone https://github.com/NVIDIA/cuda-samples.git
cd cuda-samples/Samples/1_Utilities/deviceQuery/
make
./deviceQuery

After checking CUDA, we will check cuDNN:

cp -r /usr/src/cudnn_samples_v8/ ~/Documents/workspace/
cd cudnn_samples_v8/mnistCUDNN/
sudo apt install libfreeimage3 libfreeimage-dev
sudo apt-get update
sudo apt-get upgrade
make clean && make
./mnistCUDNN

To monitor the board, we will install jetson-stats:

sudo pip3 install -U jetson-stats

To check your board details and version of different software using jtop, as well as the usage across its computing resources and power consumption, there are some Python scripts that use jtop. For example jtop_properties.py is a quick way to monitor the aforementioned.

If you are a Visual Studio Code user, it is supported on the Jetson. Run the following commands:

cd Downloads/
wget -qO- https://packages.microsoft.com/keys/microsoft.asc | gpg --dearmor > packages.microsoft.gpg
sudo install -o root -g root -m 644 packages.microsoft.gpg /etc/apt/trusted.gpg.d/
sudo sh -c 'echo "deb [arch=amd64,arm64,armhf signed-by=/etc/apt/trusted.gpg.d/packages.microsoft.gpg] https://packages.microsoft.com/repos/code stable main" > /etc/apt/sources.list.d/vscode.list'
rm -f packages.microsoft.gpg
sudo apt install apt-transport-https
sudo apt update
sudo apt install code

For my board, I bought the Yahboom CUBE nano case. On their page, there are also tutorials and code for setting up the case and configuring the OLED screen that comes with it. Finally, there is also a GitHub repo associated with the case.

First, we will install the dependencies:

sudo apt-get install libopenblas-base libopenmpi-dev libomp-dev
sudo apt-get install libjpeg-dev zlib1g-dev libpython3-dev libopenblas-dev libavcodec-dev libavformat-dev libswscale-dev

Then, we initialize the conda environment for PyTorch:

conda create -n torchenv python=3.10 pip
conda activate torchenv

Now, we can install PyTorch:

pip install Cython
cd ~/Downloads
wget https://nvidia.box.com/shared/static/0h6tk4msrl9xz3evft9t0mpwwwkw7a32.whl -O torch-2.1.0-cp310-cp310-linux_aarch64.whl
pip install numpy torch-2.1.0-cp310-cp310-linux_aarch64.whl

Finally, we install torchvision:

cd ~/Downloads
git clone --branch v0.16.1 https://github.com/pytorch/vision torchvision
export BUILD_VERSION=0.16.1
cd torchvision/
python setup.py install --user
cd ../
pip install Pillow

To test PyTorch, run the following:

import torch

print(torch.__version__)
print('CUDA available: ' + str(torch.cuda.is_available()))
print('cuDNN version: ' + str(torch.backends.cudnn.version()))

a = torch.cuda.FloatTensor(2).zero_()
print('Tensor a = ' + str(a))
b = torch.randn(2).cuda()
print('Tensor b = ' + str(b))
c = a + b
print('Tensor c = ' + str(c))

To test torchvision, run the following:

import torch
import torchvision

print(torchvision.__version__)

from torchvision.models import resnet50

m = resnet50(weights=None)
m.eval()
x = torch.randn((4,3,224,224))
m(x)

To ensure that libtorch is installed, run the following:

cd ~/Documents/workspace/
mkdir tests
cd tests
mkdir build

Then, create a CMakeLists.txt file, with the following content:

cmake_minimum_required(VERSION 3.18 FATAL_ERROR)
project(torchsc)

find_package(Torch REQUIRED)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${TORCH_CXX_FLAGS}")

add_executable(torchsc torchsc.cpp)
target_link_libraries(torchsc "${TORCH_LIBRARIES}")
set_property(TARGET torchsc PROPERTY CXX_STANDARD 17)

# The following code block is suggested to be used on Windows.
# According to https://github.com/pytorch/pytorch/issues/25457,
# the DLLs need to be copied to avoid memory errors.
if (MSVC)
  file(GLOB TORCH_DLLS "${TORCH_INSTALL_PREFIX}/lib/*.dll")
  add_custom_command(TARGET torchsc
                     POST_BUILD
                     COMMAND ${CMAKE_COMMAND} -E copy_if_different
                     ${TORCH_DLLS}
                     $<TARGET_FILE_DIR:example-app>)
endif (MSVC)

Finally, create a torchsc.cpp file, with the following content:

#include <torch/torch.h>
#include <iostream>

int main() {
    torch::Tensor tensor = torch::rand({2, 3});
    std::cout << tensor << std::endl;
}

The directory structure should look like this:

.
├── build
├── CMakeLists.txt
└── torchsc.cpp

1 directory, 2 files

To build the project, run the following:

cd build
cmake -DCMAKE_PREFIX_PATH=`python3 -c 'import torch;print(torch.utils.cmake_prefix_path)'` ..
cmake --build . --config Release

Finally, run the executable:

./torchsc

Kineto is a library that provides performance analysis for PyTorch. It is a part of the PyTorch Profiler. However, it is not built in the PyTorch wheel for Jetson. To install it, you would need to first build PyTorch from source. After that, you can build libkineto from source. Otherwise, you will be getting the following warning:

static library kineto_LIBRARY-NOTFOUND not found

To install Kineto from source, you can run the following:

export CUDA_SOURCE_DIR=/usr/local/cuda-12.2
git clone --recursive --branch v0.4.0 https://github.com/pytorch/kineto.git
cd kineto/libkineto
mkdir build && cd build
cmake ..
make

After ensuring that libkineto is working, you can install it:

sudo make install

To test the libkineto library, run the following:

import torch
import torch.nn as nn

x = torch.randn(1, 1).cuda()
lin = nn.Linear(1, 1).cuda()

with torch.profiler.profile(
    activities=[
        torch.profiler.ProfilerActivity.CPU,
        torch.profiler.ProfilerActivity.CUDA]
) as p:
    for _ in range(10):
        out = lin(x)
print(p.key_averages().table(
    sort_by="self_cuda_time_total", row_limit=-1))

sudo nvpmodel -m 0
sudo jetson_clocks

Also set fan speed to maximal:

sudo jetson_clocks --fan

sudo apt-get update
sudo apt-get install openjdk-11-jdk
java -version

To install Bazel, you can run the following:

cd ~/Downloads
wget https://github.com/bazelbuild/bazelisk/releases/download/v1.8.1/bazelisk-linux-arm64
chmod +x bazelisk-linux-arm64
sudo mv bazelisk-linux-arm64 /usr/local/bin/bazel
which bazel

It is important to note that the NVIDIA SDK Manager must be installed on an Ubuntu 20.04 engine. I tried two different machines running Ubuntu 22.04 and attempted to flash the board, but it would yield errors. I also tried Ubuntu 18.04, but the latest supported Jetpack was 5.x.y, and at the moment of writing, the latest Jetpack is 6.z. Therefore, the host machine must be running Ubuntu 20.04.

• Deep Learning Libraries Compilation on Jetson Nano

• Install torch-tensorrt