Help:Entering special characters

For help viewing special characters, see Help:Special characters.

For help with punctuation characters as used in Wikipedia, see Help:Punctuation.

Many special characters (those not on the standard computer keyboard) are useful—and sometimes necessary—in Wikipedia articles. Even articles that use only English words may use punctuation such as an em dash (—), and symbols such as a section sign (§) or registered mark (®). Articles about or that mention European persons or places may use many extended Latin characters, and articles about other persons and places may require characters from entirely different alphabets. This article describes several methods for entering such characters.

Entry methods

There are several ways to enter a special character into wikitext.

Special character link

Use a special-character link to enter a Unicode (UTF-8) character. Links are available under Special characters above the edit window, and below the buttons at the bottom of the edit window (for more information on the latter, see Help:CharInsert). Clicking a special-character link enters that character at the current position of the cursor in the edit window, so you need to position the cursor where you want it before clicking the link.

Clicking the arrow to the left of Special characters above the edit window opens a list of groups of images of special characters (see Figure 1 below); clicking again on the arrow (which now points down) closes the list. Click on a group name (e.g., Symbols) to display that group; click on the image of the appropriate character to enter that character at the current cursor position in the edit window. Some of the images of different characters are very similar in appearance, so it is important to use the correct image. For example, the images for the closing single quotation mark (’) and closing double quotation mark (”) are very similar to the images for the single prime (′) and double prime (″) characters.

Figure 1. Special-character links above edit window: Symbol group

Groups for the special-character links below the edit window are displayed one at a time; the default group is Insert, which includes punctuation and some other common symbols (see Figure 2 below), but another group may be shown if you have previously selected it. Click the down-pointing arrow at the right of this box to display other groups; click on the appropriate group to select it. When the cursor is passed over a special-character link, the link is underlined; clicking on the underlined link enters that character at the current cursor position in the edit window.

Figure 2. Special-character links below edit window: default Insert group

Russian letters are in the Cyrillic group; most other European letters are in the Latin group. You may need to click several categories in both places to find your special character, especially if it’s non-alphabetic: mathematical symbols can be at Symbols, Insert, or Math and logic (the latter two are only at the bottom link), or at Wikipedia:Mathematical symbols and its linked articles.

Some character images and links include pairs of opening and closing quotation marks. By default, the character pair is entered at the current cursor position; if a passage of text is selected before the image or link is clicked, the quotation marks are entered at the beginning and end of the selection.

This functionality is provided by MediaWiki's CharInsert Extension, which has been installed by Wikipedia administrators.

Keyboard code

Enter a Unicode character using an Alt code (Windows operating system), the Option key (Macintosh computer), or Unicode combination (Linux).

Some keyboards have a Compose key that provides similar functionality with some other operating systems.

Lists of Alt codes and Option key combinations are given in sources linked under External links.

On the iPhone and iPad (IOS), special characters are entered using the template {{Unicode|&#x any-four-digit-hex-number ;}}. (Space between {&#x00A0{ should be removed.) This will display more accurately in some browsers, compared with the just &#x any-four-digit-hex-number ; . In this operating system, the menus of characters at the bottom of WP Edit pages are more limited than with Windows.

Windows—Alt code

Under Windows, the Alt key is pressed and held down while a decimal character code is entered on the numeric keypad; the Alt key is then released and the character appears. The numerical code corresponds to the character’s code point in the Windows 1252 code page, with a leading zero; for example, an en dash (–) is entered using Alt+0150. The leading zero is required; if it is omitted, a character corresponding to the code point in the default OEM code page is entered. For example, if the OEM default is code page 437, Alt+150 gives û.

On a computer running the Microsoft Windows operating system, many special characters that have decimal equivalent codepoint numbers below 256 can be typed in by using the keyboard's Alt+decimal equivalent code numbers keys.

For example, the character é (Small e with acute accent, HTML entity code é) can be obtained by pressing Alt+130. First press the Alt key (and keep it depressed) with your left hand, then press the digit keys 1, 3, 0, in sequence, one by one, in the right-side numeric keypad part of the keyboard, then release the Alt key.

Many special characters, however, for example λ (small lambda), cannot be obtained from their decimal code 955 (or 0955), by using it with the Alt key inside Notepad or Internet Explorer). You'll get a wrong character, "╗" or "»".

The WordPad editor accepts (decimal numeric entity codepoints) values above 255, so it can be used to obtain the special/Unicode characters, which can then be copied and pasted where those characters are needed.

To correctly obtain special characters which have decimal code points above 255, another option (not available in Internet Explorer) is to use or type a character's hex equivalent code point first, followed by pressing the Alt+X keys. To produce a λ, for example, open or start WordPad, Notepad, Word, LibreOffice Writer etc. editing application software, then type in 3BB (the hexadecimal equivalent numeric code point of the character λ), then press Alt+X. Hex code 3BB will convert/turn into the λ character, which can now be copied and pasted where you want to use it. (In IE use its HTML hexadecimal equivalent code λ or its HTML decimal equivalent code λ.)

Macintosh—Option key

On a Macintosh computer, the ⌥ Opt key (and sometimes another key) is pressed and held down while another key is pressed; the ⌥ Opt key (and when applicable, the other key) is then released, and the character appears. For example, an en dash is entered using ⌥ Opt+-; an em dash (—) is entered using ⇧ Shift+⌥ Opt+-.

Also on a Macintosh pressing and holding certain letters (the vowels and a few other letters) brings up a pop-up menu of related special characters, such as accented versions of vowels, which can be clicked on or selected numerically.

Linux—Unicode

On Linux, one of three methods should work:

• Hold Ctrl+⇧ Shift and type U followed by up to eight hex digits (on main keyboard or numpad). Then release Ctrl+⇧ Shift.
• Hold Ctrl+⇧ Shift+U and type up to eight hex digits, then release Ctrl+⇧ Shift+U.
• Type Ctrl+⇧ Shift+U, then type up to eight hex digits, then type ↵ Enter.

In LibreOffice, OpenOffice.org and Inkscape, for example, only the second method works. In GTK only the third method works.

iOS

In the iOS operating system, used on the iPhone and iPad, accented characters used in Western European languages are generated by holding the finger down on the character needing a diacritic, which opens a menu. Some of the most common special characters are also generated this way. Holding the finger on the $ key, for example, accesses ₽ (Spanish peseta, pre-Euro Spanish money), ¥ (yen), € (euro), ¢, £, and ₩. The en dash, em dash, and • are accessed by holding the hyphen key down. The § is accessed by holding the & down. In addition, there are 308 alternate keyboards which are installed via Settings - General - Language and region - Add language. These include Arabic, Russian, Hebrew, Punjabi, and many obscure ones, like Yiddish, Thai, and Armenian.

It is not possible to directly install a new operating system font in iOS. Third-party applications offer fonts, mostly sans-serif decorative fonts not suitable for text, in the form of alternative keyboards. These programs resemble a TSR Terminate and Stay Resident program under MS-DOS: one runs the program to install the font/keyboard, then exits the program. Keyboards installed are selected by the globe to the left of the spacebar. These programs, since third parties can under some conditions access the users' typing, can bring security risks. Other third-party occupations offer fonts that are only usable within the application.

External application

Windows

Select, copy and paste the character from the Character Map application.

Macintosh

There are two external options:

• Enter the character by double-clicking on the character you want in the Special Characters tool, available at the bottom of any Edit menu. You can customize the character sets that are shown, e.g., to add more phonetic alphabet symbols, by following the directions given here.
• Enable the Input menu (via the 'Input Sources' panel of the 'Keyboard' System Preferences). This gives access to:
  • the Keyboard Viewer, which can be used to view and input characters accessed via the ⌥ Option key
  • the Character Viewer, which can be used to access any Unicode character. It is also available from the Special Characters tool

Linux

Select, copy, and paste the character using the GNOME Character Map. If not already installed along with GNOME, it is usually available as "gucharmap" (which can be installed with "yum install gucharmap" as root on a Redhat-like Linux distribution, for example).

In KDE, a similar application is named "KCharSelect". In Debian Linux specifically, you can type "sudo apt install kcharselect" to install it.

HTML character reference (not recommended)

Use an HTML character reference. The reference can be either named or numeric; either type begins with an ampersand (&) ends with a semicolon (;). A named reference is of the form &name;; for example, à refers to a lower-case Latin a with grave accent (à). Because the names are reasonably mnemonic, they are usually easier to remember than numerical codes, and accordingly are easier for other editors to recognize.

Some Unicode characters, such as Turkish letters, do not have HTML names, so a numerical reference is sometimes the only option using HTML. An HTML numeric character reference is of the form &#D; or &#xH;; D and H are the character’s Unicode code point in decimal and hexadecimal. For example, either — or — can be entered to give U+2014, em dash (—). Because a character’s Unicode code point is usually given in hexadecimal with a prefixed "U+", the hexadecimal code is arguably more convenient. Of course, when a name exists, a named reference (e.g., — for an em dash) is usually more convenient (and more easily recognized) than either numerical code.

HTML character names (and the corresponding hexadecimal and decimal codes) are given in List of XML and HTML character entity references.

Problems with HTML references

Because a character reference uses only ASCII characters, it does not require that a Web browser support Unicode, and it is unambiguous when a Web page does not announce its character encoding, when the browser’s encoding is incorrectly manually set, and even when the character does not display properly with some browsers. Accordingly, it is usually the most "Web safe" approach. However, character references are distracting for many editors, and they may cause difficulties with searches in Wikipedia (see below).

Some old browsers incorrectly interpret codes in the range 128–159 as references to the native character set. Because the code points 128 through 159 are not used for displayable glyphs in either ISO-8859-1 or Unicode, character references in that range (such as ƒ) are illegal in HTML and ambiguous, though they are commonly used by many web sites. Almost all browsers treat ISO-8859-1 as Windows-1252, which does have printable characters in that space, and they often found their way into article titles on English projects, which really caused confusion when trying to create interwiki links to said pages.

Generally speaking, Western European languages, such as Spanish, French, and German pose few problems. For specific details about the language in Turkey, see: Help:Turkish characters. (More may be added to this list as contributors in other languages appear, although according to this deletion and this discussion, there may be little need for such lists in the future.)

Editing notes for specific writing systems

Egyptian Hieroglyphs

E.g., <hiero>P2</hiero> gives

See Help:WikiHiero syntax.

This is not dependent on browser capabilities, because it uses images on the servers.

Hieroglyphs can also be represented in Unicode using the Aegyptus font.

Esperanto

in edit box	in database and output
S	S
Sx	Ŝ
Sxx	Sx
Sxxx	Ŝx
Sxxxx	Sxx
Sxxxxx	Ŝxx

MediaWiki installations configured for Esperanto use UTF-8 for storage and display. However, when editing the text is converted to a form that is designed to be easier to edit with a standard keyboard.

The characters for which this applies are: Ĉĉ, Ĝĝ, Ĥĥ, Ĵĵ, Ŝŝ, Ŭŭ. You may enter these directly in the edit box if you have the facilities to do so. However when you edit the page again you will see them encoded as Sx. This form is referred to as "x-sistemo" or "x-kodo". In order to preserve round-trip capability when one or more xs follow these characters or their non-accented forms (Cc, Gg, Hh, Jj, Ss, Uu), the number of xs in the edit box is double the number in the actual stored article text.

For example, the interlanguage link [[en:Luxury car]] to en:Luxury car has to be entered in the edit box as [[en:Luxxury car]] on eo:. This has caused problems with interwiki update bots in the past.

Browser issues

Some browsers are known to do nasty things to text in the edit box. Most commonly they convert it to an encoding native to the platform (whilst the NT line of Windows is internally UCS-2LE—2 Byte subset of UTF-16—it has a complete duplicate set of APIs in the Windows ANSI code page and many older apps tend to use these, especially for things like edit boxes). Then they let the user edit it using a standard edit control and convert it back. The result is that any characters that do not exist in the encoding used for editing get replaced with something that does (often a question mark though at least one browser has been reported to actually transliterate text!).

Google Chrome

Google Chrome and Chromium both have a cross-platform bug that prevents the use of font substitution. This means that even if the user has the correct typeface for a given script installed, it may not display correctly or at all.

Console browsers

Lynx, Links (in text mode) and W3M convert to the console character set (Lynx and Links actually using a transliteration engine) for editing and convert back on save. If the console character set is UTF-8 then these browsers are Unicode safe but if not they are unsafe. With Lynx and Links a possible detection method would be to add another edit box to the login form but this won't work for W3M as it doesn't convert the text to the console character set until the user actually attempts to edit it.

The workaround

In database and edit box for normal browsers	In editbox for trouble browsers
œ	œ
œ	œ
œ	œ

After English Wikipedia switched to UTF-8 and interwiki bots started replacing HTML entities in interwikis with literal Unicode text, edits that broke Unicode characters became so common they could no longer be ignored. A workaround was developed to allow the problematic browsers to edit safely provided that MediaWiki knew they have problems.

Browsers listed in the setting $wgBrowserBlackList (a list of regexps that match against user agent strings) are supplied text for editing in a special form. Existing hexadecimal HTML entities in the page have an extra leading zero added, non-ASCII characters that are stored in the wikitext are represented as hexadecimal HTML entities with no leading zeros.

Currently the default settings only have IE Mac and a specific version of Netscape 4.x for Linux in the blacklist. Nevertheless it seems to have stopped most of the problems. Hopefully the default list will be expanded in future but that relies on getting someone with CVS access to commit the changes.

Please take into consideration

Linking text with special characters

Many users have settings giving underlined links. When linking a special character, in some cases the result may be mistaken for another character with a different meaning:

Linking + − < > ⊂ ⊃ gives + − < > ⊂ ⊃ which may look like ± = ≤ ≥ ⊆ ⊇. In such cases one can better use a separate link:

• A ⊂ B (see subset)

There is less risk of confusion if more than one character is linked, e.g. x > 3.

Special characters and searches

Wikipedia searches are easier if a special character is entered as Unicode. If an HTML entity is used, a word like Odiliënberg can only be found by searching for Odili, euml, nberg or combination thereof; this is actually a bug that should be fixed—the entities should be folded into their raw character equivalents so all searches on them are equivalent. See also Help:Searching.

See also

• Alt code
• Option key
• Help:Special characters
• List of XML and HTML character entity references
• Unicode input methods
• Guide on inputting dashes
• Quick reference for the "standard" mathematical symbols in HTML
• Articles with single character titles

References

• HTML 4.01 Specification. Cambridge, MA: W3C, 1999.
• Unicode 6.0.0, the Unicode standard. Mountain View, CA: Unicode, Inc., 2010.

External links

• Windows Alt key numeric codes altcod.es
• Windows Alt codes alt-codes.org
• ALT Codes for Windows Penn State University
• Macintosh Accent Codes Penn State University
• CharacterPal—Free macOS Dashboard widget that displays key combinations for special characters