iBet uBet web content aggregator. Adding the entire web to your favor.
iBet uBet web content aggregator. Adding the entire web to your favor.



Link to original content: http://en.wikipedia.org/wiki/Halteres
Halteres - Wikipedia Jump to content

Halteres

From Wikipedia, the free encyclopedia
This article is about insect anatomy. For halteres as used in ancient sports, see Halteres (ancient Greece).

8= single pair of wings and 9= halteres
Crane fly haltere
Halteres of a fly moving

Halteres (/hælˈtɪəriːz/; singular halter or haltere) (from Ancient Greek: ἁλτῆρες, hand-held weights to give an impetus in leaping) are a pair of small club-shaped organs on the body of two orders of flying insects that provide information about body rotations during flight.[1] Insects of the large order Diptera (flies) have halteres which evolved from a pair of ancestral hindwings, while males of the much smaller order Strepsiptera (stylops)[2] have halteres which evolved from a pair of ancestral forewings.

Halteres oscillate rapidly along with the wings and operate like vibrating structure gyroscopes:[3] any rotation of the plane of oscillation causes a force on the vibrating halteres by the Coriolis effect. The insect detects this force with sensory organs called campaniform sensilla and chordotonal organs located at the base of the halteres[3] and uses this information to interpret and correct its position in space. Halteres provide rapid feedback to the wing-steering muscles,[4] as well as to the muscles responsible for stabilizing the head.[5]

Background

[edit]

The majority of insects have two pairs of wings. Flies possess only one set of lift-generating wings and one set of halteres. The order name for flies, "Diptera", literally means "two wings", but there is another order of insect which has evolved flight with only two wings: strepsipterans, or stylops;[2] they are the only other organisms that possess two wings and two halteres.[6] The strepsipterans have adapted their forewings into halteres, whereas dipterans have adapted their hindwings into halteres. This unique structure which detects rotations/perturbations during flight has never been described in nature elsewhere, though many flying insects have been shown to detect Coriolis forces from their non-specialised wings.[3]

Directions of rotation

Halteres are able to sense small deviations in body position using the gyroscopic properties of moving mass.[3] What this means is that halteres beat up and down in time with the flapping of the wings along a linear pathway, but when the fly's body begins to rotate, the path of the beating halteres also changes. Now, instead of the halteres following a linear path, they begin to follow a curved path. The larger the perturbation they experience, the farther the halteres move from their original linear path.[7] During these periods, the haltere is no longer moving in only two directions (up and down), but four (up, down, left, and right). The force exerted on the halteres in response to this left right movement is known as Coriolis force and can be produced when any moving object is rotated in the three directions of rotation, yaw, pitch or roll (see figure). When this occurs, tiny bell-shaped structures at the base of the haltere experience strain as the haltere stalk bends in their direction.[7][8] The nervous system can then transform the bending of these hairs into electrical signals, which the fly interprets as body rotation information. The fly uses this information to make corrections to its position and thereby restabilizes itself during flight.[3] Further details explaining the dynamics and physiology of halteres are described below.

Halteres are typically only associated with flight stabilization, but their ability to detect body rotations can elicit compensatory reactions not only from the wing steering muscles, but also from neck muscles which are responsible for head position and gaze.[5][9] Halteres may also be useful for other behaviors. Certain species of flies have been observed to oscillate their halteres while walking in addition to oscillating them during flight. In these individuals, halteres could thus be detecting sensory information during walking behavior as well. When the halteres are removed, these insects perform more poorly at certain walking challenges. However, how haltere information is processed and used during walking remains, with few exceptions, unclear.[10] Specific examples of what has been found are described below.

History

[edit]

Halteres were first documented by William Derham in 1714. He discovered that flies were unable to remain airborne when their halteres were surgically removed, but otherwise behaved normally.[11] This result was initially attributed to the haltere's ability to sense and maintain equilibrium. In 1917 v. Buddenbrock asserted that something else was responsible for the flies' loss of flight ability.[12] He claimed that the halteres should instead be considered "stimulation organs".[3][12] In other words, that the activity of the halteres energized the wing muscular system, so that they acted as an on/off switch for flight. V. Buddenbrock attempted to show that activation of the halteres would stimulate the central nervous system into a state of activity which allowed the wings to produce flight behavior.[12] It has since been concluded that this is not in fact true, and that the original assertion that halteres act as balance organs is the correct one. V. Buddenbrock was able to show that immediately after haltere removal flies were unable to produce normal wing movements. This was later explained by the fact that allowing flies a few minutes recovery time post-surgery resulted in total recovery of normal flight muscle control. Further, in an interesting side experiment performed by Pringle (1938), when a thread was attached to the abdomen of haltereless flies, relatively stable flight was again achieved.[7] The thread in these experiments presumably aided in keeping the fly from rotating (similar to the way a heavy basket below a hot air balloon prevents the balloon from tipping), which supported the hypothesis that halteres are responsible for sensing body rotations.[3]

The original balancer theory, which was postulated by Pringle (1948), only accounted for forces produced in two directions. Pringle claimed that yaw was the only direction of rotation that flies used their halteres to detect. Using high speed video analysis, Faust (1952) demonstrated that this was not the case and that halteres are capable of detecting all three directions of rotation.[13] In response to this new discovery, Pringle reexamined his previous assumption and came to the conclusion that flies were capable of detecting all three directions of rotation simply by comparing inputs from the left and right sides of the body.[14] Of course, this is not the actual mechanism by which flies detect rotation. Different fields of sensory organs located in different regions at the base of each haltere detect the different directions of rotation, which also explains why flies with one haltere are still able to fly without issue.[8]

Evolution

[edit]

It is generally accepted that the halteres evolved from the non-flight wings of insects – the hind-wings of Diptera and the fore wings of Strepsiptera respectively. Their movement, structure, function and development all support this hypothesis. Characterizations of the arrangement of sensory organs known as campaniform sensilla, found at the base of the haltere, show many similarities to those found at the base of the hindwings in other insects.[3] The sensilla are arranged in a way so similar to that of hindwings, that were the halteres to be replaced with wings, the forces produced would still be sufficient to activate the same sensory organs.[3] Genetic studies have also brought to light many similarities between halteres and hindwings. In fact, haltere development has been traced back to a single gene (Ubx), which when deactivated results in the formation of a hindwing instead.[15] Because just a single gene is responsible for this change, it is easy to imagine a small mutation here leading to the formation of the first halteres.[15]

Convergent evolution

[edit]

Though no other structure with entirely the same function and morphology as halteres has been observed in nature, they have evolved at least twice in the class Insecta, once in the order Diptera and again in Strepsiptera. Another structure in the class insecta also exists whose primary function is not the same as halteres, but that additionally serves a similar balancing function. This occurs in the order Lepidoptera and refers to the antennae of moths and butterflies.[16]

Strepsipteran halteres: teardrop-shaped structures located between the fore and mid legs (indicated by red arrows)

Strepsipteran haltere

[edit]

Strepsipterans are a unique group of insects with major sexual dimorphism. The females spend their entire lives in a grub-like state, parasitizing larger insects. The only time they ever come out of their host insect is to extend their fused heads and thoraces for males to notice. The males are also parasites, but they eventually will leave their host to seek their female counterparts. Because of this, they still retain the ability to fly. Male strepsipterans uniquely possess two hindwings, while their forewings have taken on the club-like form of halteres.[17] Though strepsipterans are very difficult to locate and are additionally rather short-lived, Pix et al. (1993) confirmed that the specialized forewings that male Strepsiptera possess perform the same function as dipteran halteres. Rotational movements of the body combined with the oscillating halteres produce Coriolis forces that can be detected by fields of mechanosensors (campaniform sensilla) located at the base of the halteres. Using functional morphology and behavior studies, Pix et al. showed that these sensors then transmit body position information to the head and abdomen to produce compensatory movements.[6] For simplicity, the remainder of this article will refer only to dipteran halteres.

Lepidopteran antennae

[edit]

Certain lepidopterans (moths and butterflies) exhibit small amplitude oscillation of their antennae at constant angles during flight.[16] Antennal movements in lepidopterans were originally hypothesized to aid in wind or gravity perception.[18] A study performed using the hawk moth, Manduca sexta, confirmed that these tiny, antennal oscillations were actually contributing to body rotation sensation.[16]

Sane et al. (2007) determined that antennae were responsible for flight stabilization in hawk moths by removing the long part of the antenna (the flagellum), then reattaching it to determine its influence on flight performance. When the flagella were removed, the moths were no longer able to maintain stable flight. After reattachment of the flagella, flight performance was restored. The source of this difference was determined to be mechanosensory. There are two sets of mechanosensory organs located at the base of the lepidopteran antenna, Böhm's bristles and the Johnston organ. These fields of receptors respond to different directions of antennal movements. Antennae are also capable of sensing odor, humidity, and temperature. Sane et al. (2007) was able to demonstrate that it was the mechanosensors that were responsible for flight stability as opposed to the other sensory organs, because when the flagella were removed and then reattached, all antennal nerves were severed excluding those at the base (Böhm's bristles and the Johnston organ).[16]

Genetics

[edit]

In segmented organisms there are genes called Hox genes, which determine the development of serial homologs, or repeating structures within an organism (e.g. jointed appendages of arthropods or vertebrae in mammals[19]). In insects, the thorax is separated into different segments. One of the things that the Hox gene Ultrabithorax (Ubx) is responsible for, is specifying the identity of the third thoracic segment of their body.[15] Proper hindwing development in a number of insect species is dependent on Ubx, including butterflies, beetles, and flies.[20][21][22] In fruit flies, (Ubx) is responsible for the formation of the halteres during metamorphosis. If this gene is experimentally deactivated, the haltere will develop into a fully formed wing.[15] This single homeotic gene change results in a radically different phenotype, but also begins to give us some insight into how the ancestors of flies' hindwings may have originally evolved into halteres.[15]

Though it is clear that Ubx is the primary gene responsible for hindwing formation, Ubx also regulates other genes once expressed. Weatherbee (1998) postulated that differences in Ubx expression patterns or levels may not be responsible for the observed physiological changes. Instead, he suggested that Ubx-regulated target gene sets were the direct source of the observed changes. Several Ubx-regulated target genes have been identified, including two direct targets, spalt and knot, which are expressed in the wing and repressed in halteres, and which are not affected by extradenticle.[23][24] Other genes which are expressed in wings and repressed in halteres have also been identified, but whether or not they act as direct targets of Ubx regulation are still unknown.[20][25][26]

Dynamics

[edit]
Fly thorax showing side view of dorsal longitudinal (DLM; upper left) and dorso-ventral (DVM; upper right) power flight muscles. Bottom image shows transverse cross section of fly.[27]

Dipteran insects along with the majority of other insect orders use what are known as indirect flight muscles to accomplish flight. Indirect insect flight muscles are composed of two sets of perpendicular muscles (see left figure) that are attached to the thorax (instead of directly to the wing base as is the case for direct flight muscles). When the first set of muscles contracts, they deform the body of the insect and compress its thorax vertically, which lifts the wings. When the first set of muscles relaxes and the second set contracts, the thorax is squeezed in the opposite direction, which extends the body vertically and moves the wings downward.[27] The below figure demonstrates this movement with only the first set of muscles.

Motion of an insect wing:
a wings
b primary and secondary flight joints
c dorsoventral flight muscles
d longitudinal muscles

The movement of the wings and the halteres are mechanically coupled.[28] Sane et al. (2015) demonstrated that in freshly killed flies, without any neural input, the movement of wings was still coupled with the movement of halteres. When a forcep was used to manually move a wing up and down, not only did the opposite wing move in synchrony, the halteres also beat in antiphase with both wings. The source of this coupling however, was not between the muscles which control the halteres and those that control the wings. Instead, two small ridges of cuticle known as the subepimeral ridges were found to be responsible. These ridges connect the right wing to the right haltere and the left wing to the left haltere.[28]

Each side of the body must be synchronized and the two sides are also coupled. That is, the left and right wings and thus the left and right halteres always beat at the same frequency. However, the amplitude of the wingbeat does not always have to be the same on the left and right side. This is what allows the flies to turn and is accomplished using a gearbox, much like what you would find in an automobile. This gearbox can change the maximum amplitude of the wing movement and determine its speed of motion. The wings of flies even have a clutch structure at their base. The clutch moves between grooves in the gearbox, to engage and disengage the wing muscles and also modulate the wingbeat amplitude. When the amplitude of the left wing is less than the right, the fly will make a left turn. Even though haltere movement is controlled by separate muscles than the wings, because the wings are mechanically coupled with the halteres, changes in wingbeat frequency extend to the haltere-beat frequency as well, but haltere beat amplitude does not change.[28]

Although halteres are coupled with the wings and with each other during flight, some flies oscillate their halteres while walking (without oscillating their wings). Because the haltere muscles are tiny in comparison to the flight muscles, flight muscle activity completely overshadows that of the haltere muscles during flight. It is unknown how haltere muscle activity during flight differs from walking. The left and right halteres show much more variable phase relationships while walking compared with flying, which may indicate decoupling of the left and right haltere muscles.[10]

Differences between species

[edit]

Although halteres are always synchronized with the movements of the wings, the phase at which they oscillate differs between species. Brachyceran flies (short-antennaed) oscillate their halteres almost exactly opposite their wings (180 degrees). More ancient suborders such as the Nematecerans (long-antennaed flies), which for example include crane flies and mosquitoes, exhibit a variety of wing-haltere phasing. These observed differences in wing-haltere coordination suggest that differences in sensory neuron output also exist between species. This means that the decoding mechanisms used by the central nervous system to interpret such movements and produce adequate motor output probably also vary depending on phylogeny.[10]

Morphology

[edit]
Electron micrograph of fly haltere and surrounding structures:
1 calyptra (squama) 2 upper calypter (antisquama) 3 haltere 4 mesopleuron 5 hypopleuron 6 coxa 7 wing 8 abdominal segment 9 mesonotum c capitellum of haltere p pedicel of haltere s scabellum of haltere

The general structure of halteres are well recognized, but much variability exists between species. The more ancient family groups, such as Tipuloidea (crane flies), possess halteres with rather long stalks. This causes the haltere bulbs to be much further from the body and easily visible to the naked eye. More derived families, such as Calliphoridae (blow flies), have developed specialized structures called "calyptrae" or "squama", which are tiny flaps of wing, that cover the haltere. Pringle (1948) hypothesized that they prevented wind turbulence from affecting haltere movements, allowing more precise detection of body position, but this was never tested. The stalk of the haltere is also not always straight. Instead, the stalk's shape in more derived families tends to be reflective of the body shape of the individual. This minimizes the amount of air space between end-knobs and the sides of the abdomen and thorax. In these families, the halteres beat so close to the body that the distance between haltere and thorax is a fraction of the diameter of the haltere bulb.[3] An extreme example of this trait is in the family Syrphidae (hoverflies), where the bulb of the haltere is positioned nearly perpendicular to the stalk.[29]

Flies typically hold their halteres at a 90-degree offset. To visualize this, if you were to imagine a person holding their arms out sideways, this would be a 180-degree offset. If that person then moved their arms backward so that the angle created between their fingertips and spine was 90 degrees, this would be a 90-degree offset. The halteres of flies work the same way. They are positioned behind their bodies, forming a 90-degree angle between the haltere bulbs and the center of their thorax. It is necessary for the halteres to be positioned like this in order to detect the three axes of motion. Those axes are yaw, pitch and roll, as illustrated in the above figure (Directions of rotation). The mechanoreceptors at the base of the halteres are only able to measure force in two directions (horizontal and vertical), so a single haltere is only able to measure rotations along two of the three axes. Because the halteres are set at different angles (90-degree offset), they also beat along two separate horizontal and vertical axes. This gives them the ability to acquire information from two non-parallel planes and allows sensation of rotation in all three directions. However, flies are most sensitive to pitch.[3][30]

Haltere length and shape varies from species to species.

Neurophysiology

[edit]

When halteres are experimentally induced to flap, volleys of action potentials within the haltere nerve occur in synchrony with the haltere-beat frequency.[3] When flies are then rotated, these volleys break down, likely in response to different groups of sensilla being activated to inform the fly of its recently changed body position. Haltere afferents have also been shown to terminate in the mesothoracic neuropil where flight muscle neurons are located.[31] Haltere afferent activity responding to rotations and wing steering behavior converge in this processing region.[31]

The haltere nerve

[edit]

Sensory inputs from five sensory fields located at the base of the haltere all converge onto one nerve, the haltere nerve. How these sensory fields are organized at the level of the central nervous system is currently unknown. It has been determined that those five sensory fields all project to the thorax in a "region-specific" way and afferents originating from the forewing were also shown to converge in the same regions. Not every specific target for the haltere afferents have been determined, but a few connections between motor neurons known to be involved in wing steering control and particular haltere sensory fields have been identified, particularly one synapse between the haltere nerve and a wing steering motor neuron known as mnb1.[31][32]

Muscles

[edit]

Flies use indirect flight muscles to accomplish wing movement, and the beating haltere movements are driven by the same group of muscles (see dynamics section). In addition to the indirect flight muscles which are responsible for the flapping motion, there are also steering muscle which control the rotation/angle of the wings. Because halteres evolved from hindwings, the same complement of steering muscles exists for the other directions of movement as well. Chan et al. (1998) identified 10 direct control muscles in the haltere similar to those found in the forewing. In 1998, Chan and Dickinson proposed that the planned haltere movements (without external forces acting on them) were what initiated planned turns. To explain this, imagine a fly that wishes to turn to the right. Unfortunately, as soon as it does, the halteres sense a body rotation and reflexively correct the turn, preventing the fly from changing direction. Chan and Dickinson (1998) suggested that what the fly does to prevent this from occurring is to first move its halteres as if it were being pushed in the opposite direction that it wants to go. The fly has not moved, but the halteres have sensed a perturbation. This would allow the haltere-initiated reflex to occur, correcting the imagined perturbation. The fly would then be able to execute its turn in the desired direction.[31] This is not how flies actually turn. Mureli and Fox (2015) showed that flies are still capable of performing planned turns even when their halteres have been removed entirely.[33]

Diagram of the six major fields of campaniforms on the haltere. Four fields are located dorsally -- the dorsal Hick's papillae (dHP), dorsal basal plate (dBP), dorsal scapal plate (dSP), and the dorsal flanking sensilla (FS). Two fields are located ventrally, the ventral Hick's papillae (vHP) and the ventral scapal plate (vSP).

Campaniform sensilla

[edit]

The way in which rotation sensation is accomplished is that there are five distinct sensory fields located at the base of the haltere. These fields, which actually contain the majority of campaniform sensilla found on the exoskeleton of blowflies (more than 400 campaniform sensilla per haltere),[31][34] are activated in response to strain created by movements at the haltere base in different directions (due to Coriolis forces acting on the end knobs).[3][7][8] Campaniform sensilla are cap-shaped protrusions located on the surface of the exoskeleton (cuticle) of insects. Attached inside the cap is the tip of a dendritic projection (or sensory nerve fiber). The outer segment of the dendritic projection is attached to the inside surface of the cap. When the haltere is pushed to one side, the cuticle of the insect bends and the surface of the cap is distorted. The inner dendrite is able to detect this distortion and convert it to an electrical signal which is sent to the central nervous system to be interpreted.[35]

Chordotonal organs

[edit]

Chordotonal organs detect and transmit distortions in their position/shape in the same way that campaniform sensilla do. They differ slightly at their site of detection. Chordotonal organs, unlike campaniform sensilla, exist beneath the cuticle and typically respond to stretch as opposed to distortion or bending. Their sensory nerve endings attach between two internal points and when those points are stretched, the difference in length is what is detected and transformed into electrical signaling. There are far fewer chordotonal organs at the base of the haltere than campaniform sensilla (on the order of hundreds), so it is assumed that they are far less important for detecting and transmitting rotational information from haltere movements.[3]

Role in visual processing

[edit]

Head stabilization

[edit]

Insect eyes are unable to move independently of the head. In order for flies to stabilize their visual fields, they must adjust the position of their entire head. Sensory inputs detected by halteres not only determine the position of the body, but also, the position of the head, which can move independently from the body. Halteres are particularly useful for detecting fast perturbations during flight and only respond to angular velocities (speeds of rotation) above a certain threshold. When flies are focused on an object in front of them and their body is rotated, they are able to maintain their head position so that the object remains focused and upright. Hengstenberg (1988) found that in the roll direction of rotation, the flies' ability to maintain their head position in response to body motion was only observed at speeds above 50 degrees per second and their ability peaked at 1500 degrees per second. When halteres were removed at the bulb (to retain intact sensory organs at the base) the fly's ability to perceive roll movements at high angular velocities disappeared.[5]

Halteres and vision both play a role in stabilizing the head. Flies are also able to perform compensatory head movements to stabilize their vision without the use of their halteres. When the visual field is artificially rotated around a fly at slower angular velocities, head stabilization still occurs.[5] Head stabilization outputs due to optical inputs alone are slower to respond, but also last longer than those due to haltere inputs.[36] From this result it can be concluded that although halteres are required for detecting fast rotations, the visual system is adept by itself at sensing and correcting for slower body movements. Thus, the visual and mechanosensory (halteres) systems work together to stabilize the visual field of the animal: first, by quickly responding to fast changes (halteres), and second, by maintaining that response until it is corrected (vision).[37]

Visual-motor integration

[edit]

Flies rely on both visual information from their compound eyes and mechanical input from their halteres. Sherman and Dickinson (2002) discovered that the responsiveness of the halteres and eyes are tuned to complementary speeds of rotation. Responses to body rotations detected via the visual system are greatest at slow speeds and decrease with increased angular velocity. In contrast, body rotations detected by the halteres elicit the greatest responses at higher angular velocities and degrade as the speed of rotation decreases. The integration of these two separately tuned sensors allows the flies to detect a wide range of angular velocities in all three directions of rotation.[38]

Two main aspects of the visual field have been used to study fly vision, figure and background. Figures are the objects that the fly is focused on and background represents everything else. When haltere bulbs are removed from tethered flying flies, they are still able to track moving figures, but they struggle to stabilize moving backgrounds. If a static figure is placed in the field of view of a fly, its ability to stabilize a moving background is restored.[33] This indicates that although halteres are not required for motion vision processing, they do contribute to it in a context-dependent manner, even when the behavior is separated from body rotations. Context determines whether the fly will use its halteres or vision as the primary source of body/head position information.[10]

Non-flying haltere activity

[edit]

The necessity of halteres in flight has been well documented, yet little is known about their use in other behaviors such as walking. Certain flies in the families Muscidae, Anthomyiidae, Calliphoridae, Sarcophagidae, Tachinidae, and Micropezidae have been documented to oscillate their wings while walking in addition to during flight. The oscillation of the haltere is similar in amplitude and frequency during walking and flight for these flies, and the halteres always oscillate when walking or when flying. All other families of Diptera never oscillate their halteres while walking, but always do so while flying. Flesh flies are among those that oscillate their halteres while walking, and also perform more poorly at certain walking tasks when their halteres are removed. In contrast, fruit flies, which do not oscillate their halteres when walking, do not exhibit any differences in ability when their halteres are removed. This indicates that haltere inputs are behaviorally relevant to those species which oscillate them while walking and that they aid those individuals in walking behavior.[10] Flies in the Calyptratae clade which include common flies like house flies, blow flies, and flesh flies also use their halteres during takeoff, whereas non-Calyptratae flies do not.[39] Calyptratae flies are able to take off around five times faster than other flies. Calyptratae flies lacking halteres take a lot longer to become airborne, but takeoff time is not affected in non-Calyptratae flies without halteres. Stability during takeoff also suffers with haltere removal, but only in Calyptratae flies.[39]

References

[edit]
  1. ^ Dickinson, Michael H. (29 May 1999). "Haltere–mediated equilibrium reflexes of the fruit fly, Drosophila melanogaster". Philosophical Transactions of the Royal Society of London. Series B: Biological Sciences. 354 (1385): 903–916. doi:10.1098/rstb.1999.0442. PMC 1692594. PMID 10382224.
  2. ^ a b Merriam-Webster: stylops broadly: an insect of the order Strepsiptera |[1]
  3. ^ a b c d e f g h i j k l m n Pringle, J. W. S. (2 November 1948). "The Gyroscopic Mechanism of the Halteres of Diptera". Philosophical Transactions of the Royal Society of London B. 233 (602): 347–384. Bibcode:1948RSPTB.233..347P. doi:10.1098/rstb.1948.0007.
  4. ^ Fox, Jessica L.; Fairhall, Adrienne L.; Daniel, Thomas L. (23 February 2010). "Encoding properties of haltere neurons enable motion feature detection in a biological gyroscope". Proceedings of the National Academy of Sciences. 107 (8): 3840–3845. Bibcode:2010PNAS..107.3840F. doi:10.1073/pnas.0912548107. PMC 2840414. PMID 20133721.
  5. ^ a b c d Hengstenberg, Roland (1988). "Mechanosensory control of compensatory head roll during flight in the blowfly Calliphora erythrocephala Meig". Journal of Comparative Physiology A. 163 (2): 151–165. doi:10.1007/BF00612425. S2CID 15034239.
  6. ^ a b Pix, W; Nalbach, G; Zeil, J (1993). "Strepsipteran Forewings Are Haltere-Like Organs of Equilibrium". Naturwissenschaften. 80 (8): 371–374. Bibcode:1993NW.....80..371P. doi:10.1007/bf01138795. S2CID 43790345.
  7. ^ a b c d FRAENKEL, G.; PRINGLE, J. W. S. (21 May 1938). "Biological Sciences: Halteres of Flies as Gyroscopic Organs of Equilibrium". Nature. 141 (3577): 919–920. Bibcode:1938Natur.141..919F. doi:10.1038/141919a0. S2CID 4100772.
  8. ^ a b c Nalbach, G. (1993). "The halteres of the blowfly Calliphora". Journal of Comparative Physiology A. 175 (173): 293–300. doi:10.1007/BF00191842. S2CID 15326397.
  9. ^ Hengstenberg, R.; Sandeman, D. C.; Hengstenberg, B. (22 May 1986). "Compensatory Head Roll in the Blowfly Calliphora during Flight". Proceedings of the Royal Society of London B. 227 (1249): 455–482. Bibcode:1986RSPSB.227..455H. doi:10.1098/rspb.1986.0034. hdl:11858/00-001M-0000-0013-EFCF-0. S2CID 108935705.
  10. ^ a b c d e Hall, Joshua M.; McLoughlin, Dane P.; Kathman, Nicholas D.; Yarger, Alexandra M.; Mureli, Shwetha; Fox, Jessica L. (November 2015). "Kinematic diversity suggests expanded roles for fly halteres". Biology Letters. 11 (11): 20150845. doi:10.1098/rsbl.2015.0845. PMC 4685551. PMID 26601682.
  11. ^ Derham, William (1714). haltere. London: Physico-Theology.
  12. ^ a b c v. Buddenbrock, W (1919). "haltere". Pflügers Archiv für die gesamte Physiologie. 175 (125).
  13. ^ Faust, R. (1952). "Untersuchungen zum halterenproblem". Zool Jahrb Physiol. 63: 352–366.
  14. ^ Pringle, J. W. S. (1957). Insect Flight. Cambridge University Press. ISBN 978-0-521-13500-9.[page needed]
  15. ^ a b c d e Hersh, Bradley M.; Nelson, Craig E.; Stoll, Samantha J.; Norton, Jason E.; Albert, Thomas J.; Carroll, Sean B. (February 2007). "The UBX-regulated network in the haltere imaginal disc of D. melanogaster". Developmental Biology. 302 (2): 717–727. doi:10.1016/j.ydbio.2006.11.011. PMC 1892158. PMID 17174297.
  16. ^ a b c d Sane, SP; Dieudonné, A; Willis, MA; Daniel, TL (9 February 2007). "Antennal mechanosensors mediate flight control in moths". Science. 315 (5813): 863–6. Bibcode:2007Sci...315..863S. doi:10.1126/science.1133598. PMID 17290001. S2CID 2429129.
  17. ^ Proffitt, F. (21 January 2005). "PARASITOLOGY: Twisted Parasites From". Science. 307 (5708): 343. doi:10.1126/science.307.5708.343. PMID 15661988. S2CID 28071190.
  18. ^ Niehaus, Monika (1981). "Flight and flight control by the antennae in the Small Tortoiseshell (Aglais urticae L., Lepidoptera)". Journal of Comparative Physiology A. 145 (2): 257–264. doi:10.1007/BF00605038. S2CID 45437698.
  19. ^ "Serial homology". britannica.com/. Encyclopædia Britannica, inc. Retrieved 16 November 2015.
  20. ^ a b Weatherbee, SD; Halder, G; Kim, J; Hudson, A; Carroll, S (15 May 1998). "Ultrabithorax regulates genes at several levels of the wing-patterning hierarchy to shape the development of the Drosophila haltere". Genes & Development. 12 (10): 1474–82. doi:10.1101/gad.12.10.1474. PMC 316835. PMID 9585507.
  21. ^ Weatherbee, SD; Nijhout, HF; Grunert, LW; Halder, G; Galant, R; Selegue, J; Carroll, S (11 February 1999). "Ultrabithorax function in butterfly wings and the evolution of insect wing patterns". Current Biology. 9 (3): 109–15. Bibcode:1999CBio....9..109W. doi:10.1016/s0960-9822(99)80064-5. PMID 10021383. S2CID 15385556.
  22. ^ Tomoyasu, Y; Wheeler, SR; Denell, RE (10 February 2005). "Ultrabithorax is required for membranous wing identity in the beetle Tribolium castaneum". Nature. 433 (7026): 643–7. Bibcode:2005Natur.433..643T. doi:10.1038/nature03272. PMID 15703749. S2CID 4336906.
  23. ^ Hersh, BM; Carroll, SB (April 2005). "Direct regulation of knot gene expression by Ultrabithorax and the evolution of cis-regulatory elements in Drosophila". Development. 132 (7): 1567–77. doi:10.1242/dev.01737. PMID 15753212.
  24. ^ Galant, R; Walsh, CM; Carroll, SB (July 2002). "Hox repression of a target gene: extradenticle-independent, additive action through multiple monomer binding sites". Development. 129 (13): 3115–26. doi:10.1242/dev.129.13.3115. PMID 12070087.
  25. ^ Crickmore, MA; Mann, RS (7 July 2006). "Hox control of organ size by regulation of morphogen production and mobility". Science. 313 (5783): 63–8. Bibcode:2006Sci...313...63C. doi:10.1126/science.1128650. PMC 2628481. PMID 16741075.
  26. ^ Mohit, P; Makhijani, K; Madhavi, MB; Bharathi, V; Lal, A; Sirdesai, G; Reddy, VR; Ramesh, P; Kannan, R; Dhawan, J; Shashidhara, LS (15 March 2006). "Modulation of AP and DV signaling pathways by the homeotic gene Ultrabithorax during haltere development in Drosophila". Developmental Biology. 291 (2): 356–67. doi:10.1016/j.ydbio.2005.12.022. PMID 16414040.
  27. ^ a b Hedenström, Anders (25 March 2014). "How Insect Flight Steering Muscles Work". PLOS Biology. 12 (3): e1001822. doi:10.1371/journal.pbio.1001822. PMC 3965378. PMID 24667632.
  28. ^ a b c Deora, Tanvi; Singh, Amit Kumar; Sane, Sanjay P. (3 February 2015). "Biomechanical basis of wing and haltere coordination in flies". Proceedings of the National Academy of Sciences. 112 (5): 1481–1486. Bibcode:2015PNAS..112.1481D. doi:10.1073/pnas.1412279112. PMC 4321282. PMID 25605915.
  29. ^ "Recognising hoverflies". National Biodiversity Data Centre. Biodiversity Ireland. Archived from the original on 22 December 2015. Retrieved 2 December 2015.
  30. ^ Neal, Jonathan (27 February 2015). "Living With Halteres III". Living with insects blog. The Twenty Ten Theme. Blog at WordPress.com. Retrieved 17 November 2015.
  31. ^ a b c d e Chan, Wai Pang; Prete, Frederick; Dickinson, Michael H. (10 April 1998). "Visual Input to the Efferent Control System of a Fly's 'Gyroscope'". Science. 280 (5361): 289–292. Bibcode:1998Sci...280..289P. doi:10.1126/science.280.5361.289. PMID 9535659. S2CID 41890194.
  32. ^ Fayyazuddin, A; Dickinson, MH (15 August 1996). "Haltere afferents provide direct, electrotonic input to a steering motor neuron in the blowfly, Calliphora". The Journal of Neuroscience. 16 (16): 5225–32. doi:10.1523/JNEUROSCI.16-16-05225.1996. PMC 6579303. PMID 8756451.
  33. ^ a b Mureli, S.; Fox, J. L. (25 June 2015). "Haltere mechanosensory influence on tethered flight behavior in Drosophila". Journal of Experimental Biology. 218 (16): 2528–2537. doi:10.1242/jeb.121863. PMID 26113141.
  34. ^ Gnatzy, Werner; Grunert, Ulrike; Bender, Manfred (March 1987). "Campaniform sensilla of Calliphora vicina (Insecta, Diptera)". Zoomorphology. 106 (5): 312–319. doi:10.1007/BF00312005. S2CID 20420858.
  35. ^ Keil, TA (15 December 1997). "Functional morphology of insect mechanoreceptors". Microscopy Research and Technique. 39 (6): 506–31. doi:10.1002/(sici)1097-0029(19971215)39:6<506::aid-jemt5>3.0.co;2-b. PMID 9438251. S2CID 5552615.
  36. ^ Hengstenberg, Roland (February 1991). "Gaze control in the blowfly Calliphora: a multisensory, two-stage integration process". Seminars in Neuroscience. 3 (1): 19–29. doi:10.1016/1044-5765(91)90063-T.
  37. ^ Fuller, Sawyer Buckminster; Straw, Andrew D.; Peek, Martin Y.; Murray, Richard M.; Dickinson, Michael H. (1 April 2014). "Flying stabilize their vision-based velocity controller by sensing wind with their antennae". Proceedings of the National Academy of Sciences. 111 (13): E1182–E1191. doi:10.1073/pnas.1323529111. PMC 3977237. PMID 24639532.
  38. ^ Sherman, A; Dickinson, MH (January 2003). "A comparison of visual and haltere-mediated equilibrium reflexes in the fruit fly Drosophila melanogaster". The Journal of Experimental Biology. 206 (Pt 2): 295–302. doi:10.1242/jeb.00075. PMID 12477899.
  39. ^ a b Yarger, Alexandra M.; Jordan, Katherine A.; Smith, Alexa J.; Fox, Jessica L. (13 January 2021). "Takeoff diversity in Diptera". Proceedings of the Royal Society B: Biological Sciences. 288 (1942): 20202375. doi:10.1098/rspb.2020.2375. PMC 7892408. PMID 33434467.

Further reading

[edit]

Publications

[edit]

Books

[edit]
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Halteres&oldid=1254009561"