iBet uBet web content aggregator. Adding the entire web to your favor.
iBet uBet web content aggregator. Adding the entire web to your favor.



Link to original content: http://en.wikipedia.org/wiki/Continental_KB-1
Continental KB-1 - Wikipedia Jump to content

Continental KB-1

From Wikipedia, the free encyclopedia
KB-1
Role reconnaissance
National origin United States
Manufacturer Continental Aircraft Corporation
Designer Vincent Justus Burnelli
Introduction 1916
Number built 1

The Continental KB-1, also known as KB-1 Military Biplane or KB-1 Continental Pusher, is an early design developed by the engineer Vincent Burnelli.[1]

Development

[edit]

The KB-1 was Burnelli's second production aircraft after his Burnelli-Carisi Biplane. Burnelli's KB-1 tandem pusher biplane was a somewhat conventional design compared to his future lifting-body designs.[2] The aircraft, developed for a U.S. Air Service reconnaissance contact was not awarded a production contract despite successful demonstration flights by test pilot Bert Acosta over New York at temperatures as low as −11 °F.[3] [4]

Design

[edit]

The KB-1 is a tandem seat pusher biplane with open cockpits. The tail is supported with two steel tube booms. The landing gear used a four-wheel arrangement using Ackerman wheels[clarification needed] with "tusks" that dig into the ground for braking. The wings are set without stagger or dihedral. The fuselage is constructed of mahogany veneer.[5]

Specifications (KB-1)

[edit]

Data from AAHS Journal,Aerial Age

General characteristics

  • Crew: 1
  • Capacity: 1
  • Length: 22 ft (6.7 m)
  • Wingspan: 36 ft (11 m)
  • Height: 10 ft 3 in (3.12 m)
  • Airfoil: USA-5
  • Empty weight: 1,500 lb (680 kg)
  • Gross weight: 2,600 lb (1,179 kg)
  • Fuel capacity: 45 gal
  • Powerplant: 1 × Hall-Scott A-5A , 135 hp (101 kW)
  • Propellers: 3-bladed Paragon

Performance

  • Cruise speed: 83 kn (95 mph, 153 km/h)
  • Endurance: 4 hours

References

[edit]
  1. ^ Wood, Richard M. (2003). "The Contributions of Vincent Justus Burnelli" (PDF). Retrieved 23 November 2017.
  2. ^ Kent A. Mitchell (Spring 1997). "Burnelli and his lifting-body transports". AAHS Journal: 2.
  3. ^ "Continental Pusher Biplane". Aviation: 35. 1 February 1918.
  4. ^ Joshua Stoff. Long Island Aircraft Manufacturers. p. 46.
  5. ^ "The Continental Pusher Biplane". Aerial Age: 696. 31 December 1917.