iBet uBet web content aggregator. Adding the entire web to your favor.
iBet uBet web content aggregator. Adding the entire web to your favor.



Link to original content: http://en.m.wikipedia.org/wiki/Aircraft_fabric
Aircraft fabric covering - Wikipedia

Aircraft fabric covering

(Redirected from Aircraft fabric)

Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are the pioneering all-wood monocoque fuselages of certain World War I German aircraft like the LFG Roland C.II in its wrapped Wickelrumpf plywood strip and fabric covering.

Fabric covering of a de Havilland Tiger Moth showing rib stitching and inspection rings.

Early aircraft used organic materials such as cotton and cellulose nitrate dope; modern fabric-covered designs usually use synthetic materials such as Dacron and butyrate dope for adhesive. Modern methods are often used in the restoration of older types that were originally covered using traditional methods.

Purpose/requirements

edit

The purposes of the fabric covering of an aircraft are:

  • To provide a light airproof skin for lifting and control surfaces.
  • To provide structural strength to otherwise weak structures.
  • To cover other non-lifting parts of an aircraft to reduce drag, sometimes forming a fairing.
  • To protect the structure from the elements.

History

edit

Early use

edit
 
A Lillienthal flying machine replica

Pioneering aviators such as George Cayley and Otto Lilienthal used cotton-covered flying surfaces for their manned glider designs. The Wright brothers also used cotton to cover their Wright Flyer. Other early aircraft used a variety of fabrics, silk and linen being commonly used. Some early aircraft, such as A.V. Roe's first machines, even used paper as a covering material. Until the development of cellulose based dope in 1911 a variety of methods of finishing the fabric were used.[1] The most popular was the use of rubberised fabrics such as those manufactured by the "Continental" company. Other methods included the use of sago starch.[2] The advent of cellulose dopes such as "Emaillite" was a major step forward in the production of practical aircraft, producing a surface that remained taut (eliminating the need for frequent re-covering of the flying surfaces)[3]

World War I/Postwar

edit

The air battles of World War I were mainly fought with fabric-covered biplanes that were vulnerable to fire due to the flammable properties of the cloth covering and nitrocellulose dope.[4] National insignia painted on the fabric were often cut from downed aircraft and used as war trophies. The German aircraft designer Hugo Junkers is considered one of the pioneers of metal aircraft; his designs started the move away from fabric covering. The highly flammable mixture of fabric, dope and hydrogen gas was a factor in the demise of the Hindenburg airship.

World War II

edit
 
Damaged Vickers Wellington showing burnt and missing fabric covering

By the World War II era many aircraft designs were using metal monocoque structures due to their higher operating airspeeds, although fabric-covered control surfaces were still used on early mark Spitfires and other types. The Hawker Hurricane had a fabric covered fuselage, and they also had fabric covered wings until 1939. Many transports, bombers and trainers still used fabric, although the flammable nitrate dope was replaced with butyrate dope instead, which burns less readily.[4] The Mosquito is an example of a fabric-covered (madapollam) plywood aircraft. The Vickers Wellington used fabric over a geodesic airframe which offered good combat damage resistance.

An interesting case of ingenuity under wartime adversity was the Colditz Cock glider. This homebuilt aircraft, intended as a means of escape, employed prison bedding as its covering material; homemade glue and dope made from boiled millet were also used by the prisoners in its construction.

Introduction of modern materials

edit

With the development of modern synthetic materials following World War II, cotton fabrics were replaced in civil aircraft applications by polyethylene terephthalate, known by the trade-name Dacron or Ceconite. This new fabric could be glued to the airframe instead of sewn and then heat-shrunk to fit. Grade A cotton would typically last six to seven years when the aircraft was stored outside, whereas Ceconite, which does not rot like cotton, can last over 20 years.[4][5]

 
An Ultraflight Lazair covered using Ceconite and the Hipec process.

Early attempts to use these modern fabrics with butyrate dope proved that the dope did not adhere at all and peeled off in sheets. Nitrate dope was resurrected as the initial system of choice instead, although it was supplanted by new materials too.[4]

One fabric system, developed by Ray Stits in the United States and FAA-approved in 1965, is marketed under the brand name Poly-Fiber. This uses three weights of Dacron fabric sold as by the brand name Ceconite, plus fabric glue for attaching to the airframe (Poly-Tak), fabric preparation sealer resin (Poly-Brush) and paint (Poly-Tone). This system is not dope and instead uses vinyl-based chemicals.[4] Ceconite 101 is a certified 3.5 oz/yd2 (119 g/m2) fabric while Ceconite 102 is a 3.16 oz/yd2 (107 g/m2) fabric. There is also an uncertified light Ceconite of 1.87 oz/yd2 (63 g/m2) intended for ultralight aircraft. This method requires physical attachment of the fabric to the airframe in the form of rib-stitching, rivets or capstrips, which are then usually covered with fabric tapes.[5][6][7]

In addition to Poly-Fiber, a number of other companies produce covering processes for certified and homebuilt aircraft. Randolph Products and Certified Coatings Products both make butyrate and nitrate-based dopes for use with Dacron fabric.[8][9]

Superflite and Air-Tech systems use a similar fabric, but the finishes are polyurethane-based products with flex agents added. These finishes produce very high gloss results.[4]

Falconar Avia of Edmonton, Alberta, Canada developed the Hipec system in 1964 for use with Dacron fabric. It uses a special Hipec Sun Barrier that adheres fabric directly to the aircraft structure in one step, eliminating the need for the riveting, rib-stitching and taping used in traditional fabric processes. The final paint is then applied over the sun barrier to complete the process.[10][11]

Newer systems were developed and distributed by Stewart Systems of Cashmere, Washington and Blue River (Ceconite 7600). These two systems use the same certified dacron materials as other systems, but do not use high volatile organic compounds, using water as a carrier instead, making them safer to use and less environmentally damaging.[4][12]

Many ultralight aircraft are covered with pre-sewn envelopes of 3.9 oz Dacron that are simply screwed, bolted or laced into place. These are produced in a wide variety of colours and patterns and are commonly flown untreated or with an anti-ultraviolet radiation finish to resist sun damage.[13]

Lanitz Aviation introduced a new process in 2001 manufactured in Germany under the trade name Oratex6000.[14] Oratex has received a European EASA Supplemental Type Certificate (STC),[15] Canadian STCs,[16][17] and a US STC.[18] Oratex differs from previous systems, which all require the application of many layers of special coatings (many of them toxic) along with the time, skill, equipment and safety precautions necessary to apply them. Oratex6000 is simply glued to the airframe and then shrunk tight and does not require any coatings.[19]

Covering processes

edit

Traditional methods

edit
 
Laced panels and stitched undercambered airfoil of a Sopwith Pup

Traditional covering methods use organic materials, such as cotton.[20] Once the aircraft structure is prepared by sanding, the material is applied using dope as an adhesive. Rib-stitching is used on faster aircraft types and especially on undercambered airfoils to ensure that the fabric follows the aircraft structure. The distance between stitches is reduced in areas affected by the propeller wash. The covering would then be treated with tautening dope to remove wrinkles and increase structural strength, finish coats often containing aluminium powder would serve to protect the surface from ultra-violet light. Large fabric panels of the World War I era aircraft were often laced together through eyelets to ease access to the internal structure for maintenance. Some disadvantages compared to modern methods are the relatively short service life of the covering due to biological effects such as mildew and the labour required to achieve the end result.[21]

Modern methods

edit

Modern covering methods follow the traditional method with minor differences. Synthetic materials are used, covering is adhered to the structure using dedicated glues. The shrinking process is achieved by applying an electric iron or heat gun. Once the covering is tight, rib-stitching is again used for heavier or faster aircraft. Cosmetic finish coats are usually applied, except in the case of Oratex which normally receives no coatings. A side effect of using modern covering materials on wooden structured aircraft is that due to the much longer life the structure remains covered and un-inspected for much longer time periods, this has resulted in special periodic inspections being mandated by aviation regulatory bodies.[4][22]

With both methods of covering it is normal for the aircraft to be re-weighed after renewal of the fabric to determine any change in mass and centre of gravity.[23]

See also

edit

References

edit

Notes

edit
  1. ^ Rathbun, John B. (1919). "Wing Construction". Aeroplane Construction and Operation. Chicago: Stanton and Van Vliet. Retrieved 20 May 2021.
  2. ^ Penrose, Harald British Aviation: The Pioneer Years London: Putnam, 1967 p.323
  3. ^ "Some Notes on Fabric Varnish". Flight. Vol. 3, no. 32. 12 August 1911. p. 707. Retrieved 20 May 2021.
  4. ^ a b c d e f g h Goldenbaum, Jon: Aircraft Fabrics - Wrapping it up, AeroCrafter - Homebuilt Aircraft Sourcebook, page 31-34. BAI Communications. ISBN 0-9636409-4-1
  5. ^ a b Aircraft Spruce and Specialty (2009). "Poly-Fiber Fabric". Retrieved 2009-08-08.
  6. ^ Aircraft Spruce and Specialty (2009). "Ceconite". Retrieved 2009-08-08.
  7. ^ Aircraft Spruce and Specialty (2009). "Covering Material - Poly-Fiber". Retrieved 2009-08-08.
  8. ^ Aircraft Spruce and Specialty (2009). "Covering Material - Randolph Coatings". Retrieved 2009-08-08.
  9. ^ Aircraft Spruce and Specialty (2009). "Covering Material - Certified Coatings". Retrieved 2009-08-08.
  10. ^ Falconar Avia (July 2008). "The Modern Method for Covering & Finishing". Archived from the original on 2009-03-26. Retrieved 2009-08-08.
  11. ^ Hunt, Adam & Ruth Merkis-Hunt: Finishing With Hipec, Kitplanes June 2001 pages 70-74. Belvoir Publications. ISSN 0891-1851
  12. ^ Stewart Systems (2010). "Stewart Systems". Archived from the original on 2010-07-27. Retrieved 2010-07-14.
  13. ^ Aircraft Spruce and Specialty (2009). "Covering Material - Ultralight Sails - Quicksilver". Retrieved 2009-08-08.
  14. ^ Lanitz-Prena (2013). "Lanitz-Prena". Archived from the original on 2013-12-02. Retrieved 2013-11-15.
  15. ^ European Aviation Safety Agency Supplemental Type Certificate 10045970
  16. ^ Transport Canada. "NICO: Certificate SA 1468". wwwapps.tc.gc.ca. Retrieved 4 February 2019.
  17. ^ Transport Canada. "NICO: Certificate SP 0003". wwwapps.tc.gc.ca. Retrieved 4 February 2019.
  18. ^ Federal Aviation Administration (20 March 2017). "Supplemental Type Certificate SA03898NY". www.airweb.faa.gov. Retrieved 4 February 2019.
  19. ^ Lanitz-Prena2 (2013). "Lanitz-Prena2". Archived from the original on 2013-12-03. Retrieved 2013-11-15.{{cite web}}: CS1 maint: numeric names: authors list (link)
  20. ^ Judge, Arthur W. (1921). Aircraft and Automobile Materials of Construction. The specialists' series. Vol. 2. London: Sir Isaac Pitman & Sons. pp. 339–344. Retrieved 20 May 2021. Specifically, either grade A or grade B cotton.
  21. ^ FAA AC.43.13, pp. 81-94.
  22. ^ FAA AC.43.13, p. 84.
  23. ^ FAA AC.43.13, p. 243.

Bibliography

edit
  • Federal Aviation Administration, Acceptable Methods, Techniques and Practices-Aircraft Inspection and Repair, AC43.13.1A, Change 3. U.S Department of Transportation, U.S. Government Printing Office, Washington D.C. 1988.
  • Taylor, John W.R. The Lore of Flight, London: Universal Books Ltd., 1990. ISBN 0-9509620-1-5.

Further reading

edit
edit